HPI HPI111277

$199.99
HPI logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
discontinued 1:10 E10 Drift 2013 Mustang Falken Tire RTR
HPI HPI111277 - discontinued 1:10 E10 Drift 2013 Mustang Falken Tire RTR

HPI Racing brand 1/10 scale Electric Powered, 2.4GHz radio controlled, Ready to Run
HPI E10 on-road Justin Pawlak 2013 Falken Mustang Drift Car.
**Additional Technical Info Will Be Added When It Becomes Available. **
FEATURES:
Chassis: Bathtub type 0.078 (2mm) thick with quick change battery
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-11 2.4GHz 2-channel pistol grip
Electronic Speed Control: SC-15WP with reverse
Motor HPI Saturn 27T 540 size, HPIC1144
Charger: AC wall type
Battery: HPI Plazma 7.2V 2000mAh NiMh with Standard connector
Shocks: Composite bodied
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed
Tires: Officially licensed Falken Azenis RT-615K T-drift
2.48 (63mm) diameter, 1.02 (26mm) wide
Wheels: Officially licensed HRE C106, 5-spoke
2.08 (53mm) diameter, 1.02 (26mm) wide
Bumpers: Front, foam
Body: Pre-painted 2013 F0RD Mustang with Falken Tire graphics
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
HPI E10 on-road 2013 Falken F0RD Mustang with
painted body, 2.4GHz radio, ESC, battery, charger, wheels, tires,
27T motor, four AA batteries and manual
REQUIREMENTS:
Misc. Items: Building and track equipment
SPECIFICATIONS:
VEHICLE-
length: 14.8 (375mm)
Width, Adjustable: 7.32, 7.56, 7.80 (186, 192, 198mm)
height: 4.25 (107.95mm)
Weight: 2.8 lbs (1270g) without body
Wheelbase: 10 (255mm)
Drive Ratio: 7.48:1
Tread: Front and rear 6.25 (158.75mm)(side-to-side at wheel centers)
Front Track: 7.25 (184.15mm)
Rear Track: 7.25 (184.15mm)
Spur Gear: 65T
Tires- Front and rear: 2.48 x 1.02 (63x26mm)
BODY-
length: 18.5 (470mm)
width: 8 (203mm) at rear wheels (widest point)
7.5 (190.5mm) behind from wheels (thinnest point)
height: 4.25 (107.95mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 12x18x14 Center drive shaft 1 DTXC1597
Body pictured on the box is painted green and blue with Falken Tire
graphics and various sponsor decals
jxs 01/09/14
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov