HPI HPI111277
$199.99

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued 1:10 E10 Drift 2013 Mustang Falken Tire RTR
HPI Racing brand 1/10 scale Electric Powered, 2.4GHz radio controlled, Ready to Run
HPI E10 on-road Justin Pawlak 2013 Falken Mustang Drift Car.
**Additional Technical Info Will Be Added When It Becomes Available. **
FEATURES:
holder and adjustable motor and radio equipment positions to
easily convert from street/touring to drift driving with no extra
parts to buy
Drive: Four wheel shaft
Radio: HPI TF-11 2.4GHz 2-channel pistol grip
Electronic Speed Control: SC-15WP with reverse
Motor HPI Saturn 27T 540 size, HPIC1144
Charger: AC wall type
Battery: HPI Plazma 7.2V 2000mAh NiMh with Standard connector
Shocks: Composite bodied
Gearboxes: Closed
Differentials: Front and rear bevel-type
Transmission: Single-speed
Tires: Officially licensed Falken Azenis RT-615K T-drift
2.48 (63mm) diameter, 1.02 (26mm) wide
Wheels: Officially licensed HRE C106, 5-spoke
2.08 (53mm) diameter, 1.02 (26mm) wide
Bumpers: Front, foam
Body: Pre-painted 2013 F0RD Mustang with Falken Tire graphics
Suspension: Full-time independent
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops
of the tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
HPI E10 on-road 2013 Falken F0RD Mustang withpainted body, 2.4GHz radio, ESC, battery, charger, wheels, tires,
27T motor, four AA batteries and manual
REQUIREMENTS:
SPECIFICATIONS:
length: 14.8 (375mm)
Width, Adjustable: 7.32, 7.56, 7.80 (186, 192, 198mm)
height: 4.25 (107.95mm)
Weight: 2.8 lbs (1270g) without body
Wheelbase: 10 (255mm)
Drive Ratio: 7.48:1
Tread: Front and rear 6.25 (158.75mm)(side-to-side at wheel centers)
Front Track: 7.25 (184.15mm)
Rear Track: 7.25 (184.15mm)
Spur Gear: 65T
Tires- Front and rear: 2.48 x 1.02 (63x26mm)
BODY-
length: 18.5 (470mm)
width: 8 (203mm) at rear wheels (widest point)
7.5 (190.5mm) behind from wheels (thinnest point)
height: 4.25 (107.95mm)
COMMENTS:
Qty. Size Location Qty. Bearing Set
2 12x18x14 Center drive shaft 1 DTXC1597
Body pictured on the box is painted green and blue with Falken Tire
graphics and various sponsor decals
jxs 01/09/14