Hot Racing YEX311R
$38.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Rear Torsional Sway Bar Set - 1/8 Yeti XL
Hot Racing's rear anti-sway bar (e. g. anti-roll, swaybar, sway bar) set for the 1/8th scale Axial Yeti XL kit and RTR vehicles
- Two sway bar tuning options, including a soft and stiff. The soft bar has a 21mm flat machined at the center.
- Aluminum sway bar arms have three mounting positions to fine tune the anti-sway bar
- Anti-sway bar arms and links are anodized red durability, corrosion resistance, and great looks Easy bolt-on application
- One (1) soft spring steel torsion sway bar
- Two (2) aluminum anti-sway bar arms
- Two (2) aluminum anti-sway bar links
- Mounting hardware, including screws, bushings, washers, spacers, and o-rings
- 2mm hex wrench
- Tighten setscrew that attaches anti-sway bar arm to the bar itself snugly, but not over-tight. Use a removable threadlock on the setscrew and check tightness regularly.
- For the CNC machined aluminum rear sway bar clamps, order Hot Racing YEX311MO2
- Replacement hardware is Hot Racing RYEX311RH
description revised by: SN September 19, 2016
FEATURES:
- Designed for quick response, this system use a spring steel torsion bar to keeps torque twist and body lean to a minimum during acceleration and cornering- Two sway bar tuning options, including a soft and stiff. The soft bar has a 21mm flat machined at the center.
- Aluminum sway bar arms have three mounting positions to fine tune the anti-sway bar
- Anti-sway bar arms and links are anodized red durability, corrosion resistance, and great looks Easy bolt-on application
YOU WILL RECEIVE:
- One (1) stiff spring steel torsion sway bar- One (1) soft spring steel torsion sway bar
- Two (2) aluminum anti-sway bar arms
- Two (2) aluminum anti-sway bar links
- Mounting hardware, including screws, bushings, washers, spacers, and o-rings
- 2mm hex wrench
REQUIREMENTS:
- Recommended to use a removable-type locking adhesive on screws threading into metal- Tighten setscrew that attaches anti-sway bar arm to the bar itself snugly, but not over-tight. Use a removable threadlock on the setscrew and check tightness regularly.
COMMENTS:
- For the front sway bar set, order Hot Racing YEX311F- For the CNC machined aluminum rear sway bar clamps, order Hot Racing YEX311MO2
- Replacement hardware is Hot Racing RYEX311RH
description revised by: SN September 19, 2016
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov