Trinity TRI10108
$58.88
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
Cobalt 2 9T Dbl Rnd WireOff-
Designed for short and tight tracks where hi-torque and fast spool up
are a must, this is the Cobalt 2 9 Turn Double Wind Flat Wire
motor from Trinity.
This motor would be a good choice for 2WD buggies.
Round wire armature are heavier but have smoother wider power band.
New aluminum Epic end bell.
New copper hoods and heat sink plates provide a tighter brush fit for
less brush chatter. These parts are now closer to the commutator for
better brush support and less brush wobble as the brush wears down
New Elipse Brushes with better surface area.
Motor can has been retooled for a more precision motor bearing fit
New high temperature epoxy holds the wires more secure which prevents
the wires from shifting and throwing the armature out of balance
Computerized digital balanced results in higher rpm and longer brush
and bearing life
RPM, power, efficency, and torque readings printed on side of can
One motor with brushes and purple springs installed
Ships in a foam lined wood box with gold colored latch
Motor leads and connectors (if using) WSDC1410 - WSDM3001
length: 2.22" (56mm) (not including the motor shaft)
Can diameter: 1.42 " (36.10mm)
Shaft diameter: 1/8"
Performance
RPM 32, 372 @ 5.0V
Power 144W @ 20.0K
EFF 48.3% @ 26.3K
Torque 101.8 Nmm
For brushes, order TRIC4384 silver or TRIC5445 copper
For red springs, order TRIC5115
For purple springs, order TRIC5113
mcw03/24/2006
ir/jxs
this information was sourced from Great Planes Model Distributors
are a must, this is the Cobalt 2 9 Turn Double Wind Flat Wire
motor from Trinity.
This motor would be a good choice for 2WD buggies.
FEATURES:
Round wire armature are heavier but have smoother wider power band.
New aluminum Epic end bell.
New copper hoods and heat sink plates provide a tighter brush fit for
less brush chatter. These parts are now closer to the commutator for
better brush support and less brush wobble as the brush wears down
New Elipse Brushes with better surface area.
Motor can has been retooled for a more precision motor bearing fit
New high temperature epoxy holds the wires more secure which prevents
the wires from shifting and throwing the armature out of balance
Computerized digital balanced results in higher rpm and longer brush
and bearing life
RPM, power, efficency, and torque readings printed on side of can
INCLUDES:
One motor with brushes and purple springs installed
Ships in a foam lined wood box with gold colored latch
REQUIREMENTS:
Motor leads and connectors (if using) WSDC1410 - WSDM3001
SPECIFICATIONS:
length: 2.22" (56mm) (not including the motor shaft)
Can diameter: 1.42 " (36.10mm)
Shaft diameter: 1/8"
Performance
SPECIFICATIONS:
RPM 32, 372 @ 5.0V
Power 144W @ 20.0K
EFF 48.3% @ 26.3K
Torque 101.8 Nmm
COMMENTS:
For brushes, order TRIC4384 silver or TRIC5445 copper
For red springs, order TRIC5115
For purple springs, order TRIC5113
mcw03/24/2006
ir/jxs
this information was sourced from Great Planes Model Distributors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov