Traxxas TRA3923
$7.50
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.alternate part numbers:
Battery Hold Downs E-Maxx (2)
This is the Replacement Battery Hold Down Set for the TRA E-Maxx Truck.
These hold downs screw directly into the chassis.
FEATURES:
Adhesive backed foam strips
Posts to accomodate either flat packs or side-by-side packs.
YOU WILL RECEIVE:
Two battery pack hold downs Two 140mm adhesive foam strips
Four 12x45mm adhesive foam strips
Six 10x45mm adhesive foam strips
Four 3mm hold down posts
Two 3mm shoulder screws
Four clips
REQUIREMENTS:
SPECIFICATIONS:
Length of Hold Down Posts: 22mm
Length of Shoulder Screws: 20.5mm
COMMENTS:
(one on each hold down) with the battery hold downs inverted so
that the hold down can simply be swung out of the way to remove the
pack after the other end has been unclipped. If side-by-side packs
used, then all four posts with clip holes need to be installed
so that the hold downs can be completely removed in order to take
take out the packs.
cmc 1/21/01
ir/jl
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov