Traxxas TRA3355X
$119.69

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Vxl-3s Waterproof Esc
This is the TRA VXL-3s Waterproof brushless Electronic Speed Control.
Auto detects brushed, brushless or sensored brushless motor types
Compatible with 4-cell NiCd or NiMh batteries up to 3S LiPo packs
(11.1V)
Three drive profiles Sport, Race and Training mode
Locked rotor protection if vehicle is stuck or motor is bound
Battery over-voltage protection triggers failsafe if maximum input
voltage is exceeded
Sensor phase detection protects against improperly wiring aftermarket
sensored motors
Sensored motor backup protection switches to sensorless operation if
motor sensor fails
Auxiliary fan output (fan not included)
TRA VXL-3s Electronic Speed Control with 12 gauge motor and
battery cables, three preinstalled 3.5mm female bullet motor
connectors, TRA High-Current male battery connector, universal
receiver connector and instruction manual
Installing in vehicle and connecting to battery, receiver and motor
Input Voltage 4.8 - 11.1V (4-9 NiMh, 2S-3S LiPo)
Motor Compatibility: Brushed/ brushless /Sensorless brushless
Motor Limit: None
Continuous Current: 200A
Peak Current: 320A
BEC Current: 6.0V DC
Transistor Type: MOSFET
On-Resistance: 0.00075 ohms
PWM Frequency: 12, 000Hz
Thermal Protection: Two-Stage Thermal Shutdown
Weight: 3.84 oz (109g)
length: 2.19" (57mm)
width: 1.54" (39mm)
height: 1.3" (33mm) including heat sink
jxs 7/14/09
ir/jxs
&
FEATURES:
Auto detects brushed, brushless or sensored brushless motor types
Compatible with 4-cell NiCd or NiMh batteries up to 3S LiPo packs
(11.1V)
Three drive profiles Sport, Race and Training mode
Locked rotor protection if vehicle is stuck or motor is bound
Battery over-voltage protection triggers failsafe if maximum input
voltage is exceeded
Sensor phase detection protects against improperly wiring aftermarket
sensored motors
Sensored motor backup protection switches to sensorless operation if
motor sensor fails
Auxiliary fan output (fan not included)
YOU WILL RECEIVE:
TRA VXL-3s Electronic Speed Control with 12 gauge motor and
battery cables, three preinstalled 3.5mm female bullet motor
connectors, TRA High-Current male battery connector, universal
receiver connector and instruction manual
REQUIREMENTS:
Installing in vehicle and connecting to battery, receiver and motor
SPECIFICATIONS:
Input Voltage 4.8 - 11.1V (4-9 NiMh, 2S-3S LiPo)
Motor Compatibility: Brushed/ brushless /Sensorless brushless
Motor Limit: None
Continuous Current: 200A
Peak Current: 320A
BEC Current: 6.0V DC
Transistor Type: MOSFET
On-Resistance: 0.00075 ohms
PWM Frequency: 12, 000Hz
Thermal Protection: Two-Stage Thermal Shutdown
Weight: 3.84 oz (109g)
length: 2.19" (57mm)
width: 1.54" (39mm)
height: 1.3" (33mm) including heat sink
jxs 7/14/09
ir/jxs
&