Traxxas TRA2830X
$49.98
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Power Cell LiPo: 3000 mAh 11.1V 3S 20C
TRA brand TRA 11.1V 3S 3000mAh 20C LiPo Battery.
FEATURES:
Standard replacement battery for the TRA Aton
Also compatible with the TRA 1/10 scale VXL models (Bandit VXL,
Rustler VXL, Stampede VXL, Stampede 4x4 VXL, Slash VXL,
Slash 4x4 VXL and Rally VXL equipped with stock gear ratio and
tires
iD Auto Battery Identification allows TRA iD equipped chargers to
automatically set and optimize charge settings for specific battery
YOU WILL RECEIVE:
11.1V 3S 3000mAh 20C LiPo Battery with iD Connector and Integrated
Balance Plug
REQUIREMENTS:
LiPo compatible charger
Charging Bag
SPECIFICATIONS:
Length: 5.3 (134mm)
Width: 1.7 (42.5mm)
Thickness: 1.1 (27.8mm)
Weight: 7.9oz (225g)
Continuous Discharge: 20C
Wire Lead: 12AWG Maxx Cable
COMMENTS
Not recommended for any TRA vehicles other than the ones listed
above.
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer or Charger with Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 3C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
jxs 01/26/16
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
FEATURES:
Standard replacement battery for the TRA Aton
Also compatible with the TRA 1/10 scale VXL models (Bandit VXL,
Rustler VXL, Stampede VXL, Stampede 4x4 VXL, Slash VXL,
Slash 4x4 VXL and Rally VXL equipped with stock gear ratio and
tires
iD Auto Battery Identification allows TRA iD equipped chargers to
automatically set and optimize charge settings for specific battery
YOU WILL RECEIVE:
11.1V 3S 3000mAh 20C LiPo Battery with iD Connector and Integrated
Balance Plug
REQUIREMENTS:
LiPo compatible charger
Charging Bag
SPECIFICATIONS:
Length: 5.3 (134mm)
Width: 1.7 (42.5mm)
Thickness: 1.1 (27.8mm)
Weight: 7.9oz (225g)
Continuous Discharge: 20C
Wire Lead: 12AWG Maxx Cable
COMMENTS
Not recommended for any TRA vehicles other than the ones listed
above.
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer or Charger with Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 3C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
jxs 01/26/16
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov