Works for Competition TLP0088
$23.80
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.E-turbo for the mini z
Piggy back speed control. Add this to your existing Mini-Z electronics. Allows use of high power motors without damage to your existing electronics.
Note:
If you have a Mini-z that came new with a dark blue chassis, do not follow the instructions litterealy. Connect the red battery wire to the + side of your battery, an the black wire to the - side.
The motor connections are as described in the diagram. the instraction is in Chinese but the diagram should help.
The two large eyelet wires attach to the battery.
+ side red
- side black
Inspect your car carefully. Inside, there are wires that connect the battery to the existing controller. Use the same battery terminals for your large eyelets.
Remove your existing motor wires and attach the two small eyelet leads to
the old speed control in their place.
The remaining wires are soldered to your motor.
Note:
If you have a Mini-z that came new with a dark blue chassis, do not follow the instructions litterealy. Connect the red battery wire to the + side of your battery, an the black wire to the - side.
The motor connections are as described in the diagram. the instraction is in Chinese but the diagram should help.
The two large eyelet wires attach to the battery.
+ side red
- side black
Inspect your car carefully. Inside, there are wires that connect the battery to the existing controller. Use the same battery terminals for your large eyelets.
Remove your existing motor wires and attach the two small eyelet leads to
the old speed control in their place.
The remaining wires are soldered to your motor.
(This will work with X Mod too)
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov