TrakPower TKPC0725
$89.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued LiPo 2S 7.4V 5200mAh 100C Hard Case Saddle
TrakPower brand TrakPower 2S 7.4V 100C 5200mAh Saddle Pack LiPo Battery.
FEATURES:
Ideal for 1/10 scale off-road applications
Hard plastic case
4mm bullet connectors
ROAR approved
YOU WILL RECEIVE:
Two 3.7V Modules with 4mm Bullet Connectors
One set of 4mm male bullet Connectors
Jumper Cable with 4mm Male Bullets to wire the two modules in series
REQUIREMENTS:
Balancer and LiPo compatible charger, or LiPo charger with built-in
balancer such as the TrakPower VR-1 Dual Racing Charger, TKPP5000
or the Duratrax Onyx 225, DTXP4225
SPECIFICATIONS:
Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V (each module is 3.7V)
Capacity: 5200mAh
Max Recommended Charge Current: 1C (5.2A)
Continuous Discharge: 100C (520amps)
Pack Dimensions: 1.9 x 0.99 x 2.7 (47 x 25 x 70mm)
Weight: 9.7oz (275g)
Watt Hours: 19Wh each module, 38 watt hours total
Discharge Connector: 4mm Bullet Connector
COMMENTS
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
ALWAYS keep out of reach of children
ALWAYS set charger to 3.7V per cell
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 3.2V per cell
NEVER disassemble or modify pack in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
jxs 07/30/15
ir/jxs
FEATURES:
Ideal for 1/10 scale off-road applications
Hard plastic case
4mm bullet connectors
ROAR approved
YOU WILL RECEIVE:
Two 3.7V Modules with 4mm Bullet Connectors
One set of 4mm male bullet Connectors
Jumper Cable with 4mm Male Bullets to wire the two modules in series
REQUIREMENTS:
Balancer and LiPo compatible charger, or LiPo charger with built-in
balancer such as the TrakPower VR-1 Dual Racing Charger, TKPP5000
or the Duratrax Onyx 225, DTXP4225
SPECIFICATIONS:
Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V (each module is 3.7V)
Capacity: 5200mAh
Max Recommended Charge Current: 1C (5.2A)
Continuous Discharge: 100C (520amps)
Pack Dimensions: 1.9 x 0.99 x 2.7 (47 x 25 x 70mm)
Weight: 9.7oz (275g)
Watt Hours: 19Wh each module, 38 watt hours total
Discharge Connector: 4mm Bullet Connector
COMMENTS
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
ALWAYS keep out of reach of children
ALWAYS set charger to 3.7V per cell
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 3.2V per cell
NEVER disassemble or modify pack in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
jxs 07/30/15
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov