TrakPower TKPC0607
$59.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.LiPo 2S 7.4V 3250mAh 90C Hard Case 4mm
TrakPower brand TrakPower 2S 7.4V 90C 3250mAh Hard Case LiPo Battery.
Ideal for 1/10 and 1/12 scale on-road applications
ROAR approved
Hard plastic case for protection against the elements and crash damage
4mm female bullet connectors for positive (+) and negative (-) terminals
2mm terminal for balancing
Male connectors to solder to wire leads
2S 7.4V 90C 3250mAh LiPo Battery
Two 4mm Male Bullet Connectors
Instruction Sheet
LiPo compatible charger with balancer such as the TrakPower VR-1 (TKPP5000)
Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V
Capacity: 3250mAh
Max Recommended Charge Current: 1C (3.3A)
Continuous Discharge: 90C (297 amps)
1.8 x 0.73 x 3.7 (47 x 18.5 x 93.5mm)
Weight: 5.4oz (153g)
Watt Hours: 24Wh
Discharge Connectors: 4mm Bullet
Balance Connector: 2mm Bullet
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the To ESC or DISCHARGE lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
FEATURES:
Ideal for 1/10 and 1/12 scale on-road applications
ROAR approved
Hard plastic case for protection against the elements and crash damage
4mm female bullet connectors for positive (+) and negative (-) terminals
2mm terminal for balancing
Male connectors to solder to wire leads
YOU WILL RECEIVE:
2S 7.4V 90C 3250mAh LiPo Battery
Two 4mm Male Bullet Connectors
Instruction Sheet
REQUIREMENTS:
LiPo compatible charger with balancer such as the TrakPower VR-1 (TKPP5000)
SPECIFICATIONS:
Battery Type: Lithium Polymer
Cell Number: 2S
Rated Pack Voltage: 7.4V
Capacity: 3250mAh
Max Recommended Charge Current: 1C (3.3A)
Continuous Discharge: 90C (297 amps)
DIMENSIONS:
1.8 x 0.73 x 3.7 (47 x 18.5 x 93.5mm)
Weight: 5.4oz (153g)
Watt Hours: 24Wh
Discharge Connectors: 4mm Bullet
Balance Connector: 2mm Bullet
COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the To ESC or DISCHARGE lead
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov