Thunder Power THP610CACDC
$119.97

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Thunder Power RC AC/DC Charger/Discharger/Cycler w/Bala
NThunder Power TP610C AC/DC Powered, Battery Charger, Discharger and Cycler.
FEATURES:
Charges 1-6 cell LiPo/LiIon/LiFe, 1-14 cell NiCd/ NiMh, and 6-12V Pb lead acid cells
Built-in balancer for LiPo/LiIon/LiFe (A123) cells with two balance boards for 2-8S Thunder Power and JST-XH balance connectors
Back-lit LCD screen designed to prevent permanent fading when used in high-temp environments
Selectable charge rates from 0.1-10amps
50% Storage, 95%, 100%, and Competition Car Mode charge voltages for
LiPo/LiIon/LiFe (A123) batteries
25 user programmable memory slots for easy recall of cell counts, and charge/discharge rates for commonly used batteries
Dual computer controlled cooling fans
Firmware update-able using PGM V2
Aluminum case
Contact Thunder Power RC for specific warranty information
YOU WILL RECEIVE:
TP610C AC/DC Powered, Charger, Discharger and Cycler, Thunder Power, and JST-XH Balance Boards, 110V Power Cord, Instruction Manual, Wire Lead with Bullet Connectors and Pretinned Leads
SPECIFICATIONS:
Voltage Input: 100-240V AC or 11-18V DC
Charge Rate: Adjustable from 0.2-20A per port
Charge Current: 0.1-10 amps in 0.05 amp increments (80W max. )
Charge Voltage: 50% Storage, 95%, 100%, and Competition Car Mode
charge voltages for LiPo/LiIon/LiFe (A123) batteries, adjustable
delta peak sensitivity for NiCd/ NiMh and top off for Pb (lead acid)
Discharge Current: 0.1-1 amps in 0.05 amp increments (8W max. )
Cycles: 1-9 times with data stored for all cycles
Memories: 25 user programmable per chemistry
Balancer: Integrated for 2-6S LiPo/LiIon/LiFe (A123) with balance
connector adapter board for Thunder Power and JST-XH connectors
Firmware: User update-able using PGM-V2