Tekin TEKTT2734
$234.99
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.discontinued RSgen2 ESC 13.5rpm Gen3 Sensored BL Motor System
Tekin brand Tekin Gen 3 brushless Sensored 13.5T RPM Motor and the RS Gen 2 brushless Electronic Speed Control.
- TT2706 Motor (TEKC2706); RPM version designed for applications where higher RPM is more benefical than torque
- Ideal for 1/12 and touring car racing classes
- CNC machined T 6061 billet aluminum heat sink can
- For on- or off-road use
- 12.5mm performance rotor
- Dual-plug sensor wire harness for all sensored and sensorless systems
- Anodized end-bell plates maximize corrosion and wear resistance
- High RPM precision ball bearings
- Neodymium sintered magnet
- Rebuildable
- Adjustable timing
- Low resistance solder tabs
- Solderless sensor PCB replacement
- ESC;
- Compatible with sensored, sensorless, brushless, and brushed motors
- Datalogging capability
- High voltage programmable Battery Eliminator Circuit (BEC)
- HotWire PC interface for advanced programming and updating, EZ access programming port (HotWire Interface (TEKM1450), and Gen 2 Adaptor (TEKM3825) required)
- Forward, brake, and reverse operation
- D2 Dual Drive Mode technology
- On-board temperature indicator
- Sensor plug for precise commutation with all motors
- Gold plated solder posts
- Pit tune mode
- HDAC: High Density Copper PCBs
- Self test diagnostics and factory reset
- DGF2 Digital Glitch Filtering V2
- QuickTune programming with one-touch radio calibration
- 120 day limited warranty through Tekin beginning at date of purchase
- Redline GEN3 13.5 Turn brushless Sensored Motor with Sensor Wire
- ESC;
- Input Voltage: 4-9 cells, 2-3S LiPo
- BEC: 6.0V / 7.4V @ 5.5A
- Motor Limit brushless Mode 2S: 8.5T 2-Pole 36mm Can
- Motor Limit brushless Mode 3S: 10.5T 2-Pole 36mm Can
- Motor Limit Brushed Mode 2S: 12 Turn 36mm Can
- Motor Limit Brushed Mode 3S: 20 Turn 36mm Can
- Max Current: 120amps per phase
- Max Chassis Weight: 4lbs (1815g)
- Throttle Profiles: 7 choices on-board
- Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
- brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
- Weight: .85oz (24g)
- 13.5T Motor;
- Input Voltage: 2S all, 3S-10.5 and up
- Shaft 3.2mm (1/8) x 15.3mm
- Weight: 5.6oz (158g)
- Motor diameter: 1.40 (35.85mm)
- Motor length: 1.9 (48.5mm)
- Bearing Front: 4x13x5mm / Rear: 1/8x3/8x5/32
- Rotor Size: 12.5mm
FEATURES:
- Ideal for 1/12 and touring car racing classes
- CNC machined T 6061 billet aluminum heat sink can
- For on- or off-road use
- 12.5mm performance rotor
- Dual-plug sensor wire harness for all sensored and sensorless systems
- Anodized end-bell plates maximize corrosion and wear resistance
- High RPM precision ball bearings
- Neodymium sintered magnet
- Rebuildable
- Adjustable timing
- Low resistance solder tabs
- Solderless sensor PCB replacement
- ESC;
- Compatible with sensored, sensorless, brushless, and brushed motors
- Datalogging capability
- High voltage programmable Battery Eliminator Circuit (BEC)
- HotWire PC interface for advanced programming and updating, EZ access programming port (HotWire Interface (TEKM1450), and Gen 2 Adaptor (TEKM3825) required)
- Forward, brake, and reverse operation
- D2 Dual Drive Mode technology
- On-board temperature indicator
- Sensor plug for precise commutation with all motors
- Gold plated solder posts
- Pit tune mode
- HDAC: High Density Copper PCBs
- Self test diagnostics and factory reset
- DGF2 Digital Glitch Filtering V2
- QuickTune programming with one-touch radio calibration
- 120 day limited warranty through Tekin beginning at date of purchase
YOU WILL RECEIVE:
- RS Gen 2 brushless ESC with Instructions, Motor and Receiver Wires- Redline GEN3 13.5 Turn brushless Sensored Motor with Sensor Wire
SPECIFICATIONS:
- Input Voltage: 4-9 cells, 2-3S LiPo
- BEC: 6.0V / 7.4V @ 5.5A
- Motor Limit brushless Mode 2S: 8.5T 2-Pole 36mm Can
- Motor Limit brushless Mode 3S: 10.5T 2-Pole 36mm Can
- Motor Limit Brushed Mode 2S: 12 Turn 36mm Can
- Motor Limit Brushed Mode 3S: 20 Turn 36mm Can
- Max Current: 120amps per phase
- Max Chassis Weight: 4lbs (1815g)
- Throttle Profiles: 7 choices on-board
- Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
- brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
DIMENSIONS:
- 1.0 x 1.3 x .51 (26 x 34 x 12.9mm)- Weight: .85oz (24g)
- 13.5T Motor;
- Input Voltage: 2S all, 3S-10.5 and up
- Shaft 3.2mm (1/8) x 15.3mm
- Weight: 5.6oz (158g)
- Motor diameter: 1.40 (35.85mm)
- Motor length: 1.9 (48.5mm)
- Bearing Front: 4x13x5mm / Rear: 1/8x3/8x5/32
- Rotor Size: 12.5mm
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov