Tekin TEKTT2480
$349.99

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1/8 Rx8 Gen3 4038bl T8 Gen2 Motor 1y 2250kv
This is the Tekin RX8 Gen 3 Dual Drive Mode brushless Electronic Speed Control
and the Redline T8 Gen 2 2250Kv Sensored brushless Motor.
RX8 Gen 3 ESC;
Ideal for 1/8 scale four wheel drive buggies, truggies, monster
trucks, touring cars, GT and dirt ovals, and 1/10 scale 4WD short
course trucks and rock crawlers
D2: Dual Drive Mode Technology-compatible with sensored and
sensorless motors
Sensor plug for precise commutation with all motors
QuickTune programming and one-touch radio calibration
Programmable High Voltage BEC (6.0v / 7.4v @ 8amps)
New adjustable throttle and brake frequencies, and adjustable torque
control
Datalogging capability, Hotwire 2.0 Interface TEKM1451, and
adapter, TEKM3825 required
EZ Access HotWire Programming Port
On-board temperature indicator
HD gold-plated solder posts for easy soldering
DGF2: Digital Glitch Filtering V2
Redline T8 Gen 2 2250Kv Sensored brushless Motor:
Designed for 1/8 scale truggies
CNC machined 6061-T6 billet aluminum ribbed heat sink can
ROAR approved
Sensored and sensorless operation
Dual plug sensor wire harness
Four pole neodymium sintered magnet
ABEC5 precision high-speed oversize bearings
Rebuildable design
High current solder tabs
Solderless sensor PCB replacement
180 limited warranty through Tekin on both components beginning
at date of purchase
Redline T8 Gen 2 2250Kv Sensored brushless Motor, TEKC2365
Battery connector of modeler's choice
ESC;
Controls: Fwd/Brk or Fwd/Brk/Rev
Input: 2-6S LiPo (7.4-22.2V)
Motor Limits: brushless -varies by voltage
Brushed Fwd Mode, Brushed Fwd/Rev Mode-No Limit
Max Current: 300 amps per phase
Burst Current: 1000 amps per phase
Timing Profiles: 7 choices (on board)
Modes: FWD Only / FWD-REV / FWD-REV Delay
Programmable BEC: 6.0v / 7.4v @ 8amps
Weight: 2.7oz (76.5g)
Motor;
Motor length: 3.03" (77mm)
Motor diameter: 1.57" (40mm)
Shaft
Weight: 13oz (368g)
Voltage: 4S
Kv: 2250
Rotor: 18.5mm
jxs 05/01/17
ir/jxs
and the Redline T8 Gen 2 2250Kv Sensored brushless Motor.
FEATURES:
Ideal for 1/8 scale four wheel drive buggies, truggies, monster
trucks, touring cars, GT and dirt ovals, and 1/10 scale 4WD short
course trucks and rock crawlers
D2: Dual Drive Mode Technology-compatible with sensored and
sensorless motors
Sensor plug for precise commutation with all motors
QuickTune programming and one-touch radio calibration
Programmable High Voltage BEC (6.0v / 7.4v @ 8amps)
New adjustable throttle and brake frequencies, and adjustable torque
control
Datalogging capability, Hotwire 2.0 Interface TEKM1451, and
adapter, TEKM3825 required
EZ Access HotWire Programming Port
On-board temperature indicator
HD gold-plated solder posts for easy soldering
DGF2: Digital Glitch Filtering V2
Redline T8 Gen 2 2250Kv Sensored brushless Motor:
Designed for 1/8 scale truggies
CNC machined 6061-T6 billet aluminum ribbed heat sink can
ROAR approved
Sensored and sensorless operation
Dual plug sensor wire harness
Four pole neodymium sintered magnet
ABEC5 precision high-speed oversize bearings
Rebuildable design
High current solder tabs
Solderless sensor PCB replacement
180 limited warranty through Tekin on both components beginning
at date of purchase
YOU WILL RECEIVE:
RX8 Gen 3 Dual Drive Mode brushless ESC, TEKM2302 Redline T8 Gen 2 2250Kv Sensored brushless Motor, TEKC2365
REQUIREMENTS:
SPECIFICATIONS:
Controls: Fwd/Brk or Fwd/Brk/Rev
Input: 2-6S LiPo (7.4-22.2V)
Motor Limits: brushless -varies by voltage
Brushed Fwd Mode, Brushed Fwd/Rev Mode-No Limit
Max Current: 300 amps per phase
Burst Current: 1000 amps per phase
Timing Profiles: 7 choices (on board)
Modes: FWD Only / FWD-REV / FWD-REV Delay
Programmable BEC: 6.0v / 7.4v @ 8amps
DIMENSIONS:
1.5 x 2.2 x 1.4" (38 x 55.8 x 35.5mm) Weight: 2.7oz (76.5g)
Motor;
Motor length: 3.03" (77mm)
Motor diameter: 1.57" (40mm)
Shaft
DIMENSIONS:
19x5mm Weight: 13oz (368g)
Voltage: 4S
Kv: 2250
Rotor: 18.5mm
jxs 05/01/17
ir/jxs