Tekin TEKTT2342
1900kv 1/8 T8 G3 4030 Buggy brushless Motor Sensored/Sensorless
Tekin's T8 GEN3 racing motors are racing performance defined. With a stronger rotor, new stack features and lower resistance the T8 GEN3 motors are a versatile, unmatched and advanced power delivery system. Relentless amounts of torque and power are at your disposal with industry-leading RC motor technology. Coupled with an RX8 GEN3 utilizing Tekin's D2 Dual Drive Technology, the T8 GEN3 packs efficiency and precise control through the entire RPM range. Maintain Pro- level control of your chassis no matter the situation on the track with a T8 GEN3. Pair the T8 GEN3 with an RX8 GEN3 Speed Control for the ultimate in 1:8 scale racing power systems.
- 4 Pole 12 Slot High Torque Motor Design
- 1:8 Scale Chassis Specific
- ROAR Legal
- CNC Machined 6061-T6 Billet Aluminum Ribbed Heat Sink Can
- Neodymium Sintered Magnets
- Precision Engineered for Maximum Energy Conversion
- High Purity Copper Windings Maximize Conductivity and Efficiency
- Low Resistance, High Power Solder Tabs
- Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
- Anodized End-bell plates maximize corrosion and wear resistance
- High RPM ABEC-5 Precision Bearings
- Oversized Front Bearing adds Durability
- Rebuild-able Design
- Designed to be paired with the RX8 GEN3 ESC
- Weight: 4030 Buggy 11oz / 311g, 4038 Truggy 13oz / 368
- Shaft size: 5mm (.196") x 19mm
- Motor diameter: 40mm (1.57"), 42mm (1.65") including fins
- Motor length: 4030 Buggy 69mm (2.71"), 4038 Truggy 77mm (3.03")
- Front bearings: 5x16x5mm
- Rear bearings: 5x11x5mm
- Rotor size: 18.5mm
- Rebuildable: Yes
- Buggy:
- TT2330 - RX8 GEN3 + T8 GEN3 2650kV
- TT2331 - RX8 GEN3 + T8 GEN3 2050kV
- TT2332 - RX8 GEN3 + T8 GEN3 1900kV
- TT2333 - RX8 GEN3 + T8 GEN3 1700kV
- TT2334 - RX8 GEN3 + T8 GEN3 1400kV
- Truggy:
- TT2335 - RX8 GEN3 + T8 GEN3 2250kV
- TT2336 - RX8 GEN3 + T8 GEN3 2000kV
- TT2337 - RX8 GEN3 + T8 GEN3 1700kV
- TT2338 - RX8 GEN3 + T8 GEN3 1550kV
- TT2339 - RX8 GEN3 + T8 GEN3 1350kV
description revised by: SN October 23, 2019
FEATURES:
- Spec'd for: buggies- 4 Pole 12 Slot High Torque Motor Design
- 1:8 Scale Chassis Specific
- ROAR Legal
- CNC Machined 6061-T6 Billet Aluminum Ribbed Heat Sink Can
- Neodymium Sintered Magnets
- Precision Engineered for Maximum Energy Conversion
- High Purity Copper Windings Maximize Conductivity and Efficiency
- Low Resistance, High Power Solder Tabs
- Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
- Anodized End-bell plates maximize corrosion and wear resistance
- High RPM ABEC-5 Precision Bearings
- Oversized Front Bearing adds Durability
- Rebuild-able Design
- Designed to be paired with the RX8 GEN3 ESC
YOU WILL RECEIVE:
- One (1) 1900kV T8 G3 1/8 scale buggy race brushless motorSPECIFICATIONS:
- Voltage limit: 2650kV - 4S LiPo; 2250kV - 4S LiPo; 2050kV - 4S LiPo; 2000kV - 4S LiPo; 1900kV - 4S LiPo; 1700kV - 5S LiPo; 1550kV - 5S LiPo; 1400kV - 6S LiPo; 1350kV - 6S LiPo- Weight: 4030 Buggy 11oz / 311g, 4038 Truggy 13oz / 368
- Shaft size: 5mm (.196") x 19mm
- Motor diameter: 40mm (1.57"), 42mm (1.65") including fins
- Motor length: 4030 Buggy 69mm (2.71"), 4038 Truggy 77mm (3.03")
- Front bearings: 5x16x5mm
- Rear bearings: 5x11x5mm
- Rotor size: 18.5mm
- Rebuildable: Yes
COMMENTS:
- Available Tekin systems (motor & ESC): - Buggy:
- TT2330 - RX8 GEN3 + T8 GEN3 2650kV
- TT2331 - RX8 GEN3 + T8 GEN3 2050kV
- TT2332 - RX8 GEN3 + T8 GEN3 1900kV
- TT2333 - RX8 GEN3 + T8 GEN3 1700kV
- TT2334 - RX8 GEN3 + T8 GEN3 1400kV
- Truggy:
- TT2335 - RX8 GEN3 + T8 GEN3 2250kV
- TT2336 - RX8 GEN3 + T8 GEN3 2000kV
- TT2337 - RX8 GEN3 + T8 GEN3 1700kV
- TT2338 - RX8 GEN3 + T8 GEN3 1550kV
- TT2339 - RX8 GEN3 + T8 GEN3 1350kV
description revised by: SN October 23, 2019
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov