Tekin TEKTT1101
$105.23
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1/18 Mini Rage 5.4 Perf brushless Sy
This is the Tekin Mini Rage Electronic Speed Control
with the TT1201 Mini Rage High Performance Brushless Motor.
for 1/18 scale vehicles.
ESC
On-board programming
Adjustable drag brake and Reverse Brake strength
Programmable Reverse lockout and low voltage cutoff
Adjustable Throttle and Brake profiles (2 modes with 7 profiles each)
Pre-installed Futaba J plug (JR and KO plugs also included)
Pre-Installed ON/OFF switch
Motor
Three wire design with pre-installed 3.5mm bullet connectors
Ball bearing-supported
Sensorless and brushless 5.4kV with high performance bearings
Tekin Mini Rage Speed Control - TEKM1100
Tekin Mini Rage Performance Motor
Three 3" long leads with 3.5mm female bullet connectors installed
Two 3.5" long leads (no connector, one black and one red wire)
Four 1x1" pieces of double sided tape
Two 2.5x5mm hex head motor mounting screws (requires 2mm hex wrench)
Two black plastic radio connectors (JR and KO)
Three sheets of Tekin logo decals (various colors included)
Installation following the included instructions sheet, battery
connectors of modeler's choice, soldering iron and solder
ESC
Length: 1.72" (44mm)
Width: 0.95" (24mm)
Height: 0.4" (10mm)
Weight: 0.9oz (24.5g)
Power: 25A
Surge: 60A
Resistance: 0.0045
Input power (except 8kV motor): 4-12 cells NiCd/NiMH or 2-4 cell LiPo
Input power (8kV motor): 4-8 cell NiCd/NiMH or 2-3 cell LiPo
Power Wires: 16AWG silicone
MOTOR
Power: 5.4kV
Diameter: 0.79" (20mm) can
Diameter: .080" (2mm) shaft
Length: 1.3" (33mm)
Weight: .9oz (48 grams)
jxs 6/28/05
update
kpm10/31/2005
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov