Tekin TEKTT1040

$89.00
Tekin logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
G11 Brushed Electronic Speed Control Fwd/Brk
Tekin TEKTT1040 - G11 Brushed Electronic Speed Control Fwd/Brk

This is the Tekin G11 Sport Electronic Speed Control.
This is a Forward/Brake Speed Control (no Reverse).
FEATURES:
No turn limit if using fewer than 8 cells
Adjustable drive and brake frequency
Limitless multiple setup tuning options for every critical operating
parameter, over 600, 000 different settings
Multible adjustment modes including Brake Minimum, Drag Brake,
Current Limiter, Throttle and Brake Frequency
Zero loss solder drop fuse link
Gold plated copper soldering posts
Built-in self-test mode that checks all major systems on the ESC
Pre-installed ON/OFF switch
Pre-Installed female bullet motor connectors
Pre-Installed Tamiya style connector
Pre-Installed radio plug (Futaba J-style)
120 day limited warranty
YOU WILL RECEIVE:
One G11 Electronic Speed Control
Three 0.1uF Capacitors
Three 1x1" pieces of servo tape
Three 5.5" long zip-ties
Two servo connectors (KO and JR)
Three Tekin logo decal sheets in various colors
REQUIREMENTS:
Installation following the included instructions
SPECIFICATIONS:
Input Voltage: 4-10 Cells
On Resistance: 0.0008 ohms
Max Current: 280A
Throttle Frequencies: Adjustable from 1-11kHz
Brake Frequencies: Adjustable from 1.5-15kHz
BEC: 6.0V/5.0A
Current Limit: 10 to 90A and bypass
Power Wires: 12 gauge silicone
Weight (with wires): 1.25" (35 grams)
length: 1.85" (47mm)
width: 1.25" (32mm)
Thickness: 0.65" (16.5mm)
Motor Limit: None if using fewer than 8 cells
12T limit if using 8-10 cells
jxs 6/27/05
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov