Tamiya TAM58615

This is the electric powered, radio controlled, 1/10 scale, Tamiya Kumamon Version Dune Buggy Kit. Kumamon is a character used to publicize the Japanese Prefecture of Kumamoto in Kyushu, an island in south Japan. Chassis: DT-02 ABS plastic tub Drive: Rear wheel Motor: 380 size (540 size will fit, see COMMENTS) Pinion Gear: 10 tooth metal Electronic Speed Control: Tamiya TBLE-02S with reverse Differential: Planetary gear Gearbox: Sealed Shocks: Plastic body, friction type Transmission: Single-speed Suspension: Four wheel independent Body: Molded plastic, red in color Steering: Two-piece adjustable steering tie rods with servo saver Tires: Ribbed front 0.83" (21mm) wide, 3.1" (80mm) diameter Spiked rear 1.5" (39mm) wide, 3.2" (82mm) diameter Wheels: Nylon resin, white in color Front, 0.69" (17.5mm) wide, 2.2" (57mm) diameter Rear, 1.3" (33mm) wide, 2.2" (57mm) diameter, 12mm hex Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable 1/10 scale Tamiya Kumamon Buggy Kit with Body, Wheels, Tires, ESC 380 Motor, Servo Saver, Driver Figure, Decals and Instruction Manual Radio: 2-channel with steering servo Battery: 6-cell, 7.2V NiMH stick pack with standard connector Battery Charger: To match selected battery Transmitter Batteries: Four or eight depending on transmitter Tools and track equipment Vehicle; Length: 15.3" (390mm) Width: 9.4" (240mm) Height: 6.6" (168mm) Weight: 2.9lbs (1350g), approximate Body; Length: 14.5" (369mm) Width: 7" (178mm) Height: 2.3" (55mm) When installing a 540 size motor, the following parts are required and must be purchased separately; Tamiya #3515005 17 Tooth Pinion Gear (not carried) 3mm Grub Screw (TAMC5076) Motor Plate (TAMC3120) To paint body to match photos on box, order the following Tamiya colors; TS-8 Italian Red, TAMR5008 X-18 Semi Gloss Black, TAMR1518 X-7 Red, TAMR1507 XF-2 Flat White, TAMR1702 X-11 Chrome Silver, TAMR1511 XF-64 Red Brown, TAMR1764 To upgrade to Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 5x11mm Gearbox 2 DTXC1547 2 5x11mm Spur Gear 1 DTXC1547 2 5x11mm Rear Axles 1 DTXC1547 4 5x11mm Front Wheels 2 DTXC1547 jxs 07/22/15 ir/jxs &