Tamiya TAM58593

This is the radio controlled, electric powered, 1/10 scale M-05 Ver. II Pro Chassis Kit from Tamiya Compatible with bodies and option parts for Tamiya M-03 chassis. Optional Parts Include; **Aluminum Steering Post** **Aluminum Horn for Hi-Torque Servo Saver** **Full Ball Bearings** **DF-03 Heat Sink Bar Set** **Aluminum Turnbuckle Steering Rod** **CVA Oil-Filled Shocks** **Semi-Gloss Black Plated Wheels** **Aluminum Servo Mount (Blue)** Chassis: Plastic monocoque, shape is compatible with square battery packs Drive: Front wheel Motor Mount: Aluminum construction, designed specifically for M-05 Ver. II chassis-new design moves motor 4.5mm closer to chassis center Ball Bearings: Full set Shocks: Oil-filled, plastic body Shock Towers: Composite construction Gearbox: Integral with chassis Transmission: Single speed Differential: Three bevel gear Wheels: 11 spoke, 0.94" (24mm) wide, 1.5" (38mm) diameter Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Servo Placement: Shifted 8mm downwards to secure lower center of gravity, low profile servo compatibility Steering: Three piece tie-rod linkage with high torque steering servo and aluminum steering post Suspension: Newly designed arms constructed of reinforced plastic with set screw type rebound adjustment Tamiya M-05 Ver. II Pro Chassis Kit, Wheels, Decals, Shocks, Pinion Gear, Instruction Manual Radio: 2-channel with standard size servo Electronic Speed Control: Compatible with selected motor AA Batteries: For transmitter Motor: 540 size Battery: 6-cell stick with standard connector Battery Charger: Peak type recommended Tires: Treaded 60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter with foam inserts Body: Tamiya M-03 or M-05 type Building and track equipment Length: S 8.3" (210mm), M 8.8" (225mm), L 9.4" (239mm) Width: 6.5" (165mm) Wheelbases: 8.3" (210mm), 8.8" (225mm), 9.4" (239mm) Tread: 5.4" (138mm) center of wheels, side-to-side Gear Ratio: 5.8:1 For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 1 5x8mm Counter Gear 1 DTXC1523 1 5x11mm Counter Gear 1 DTXC1547 1 5x8mm Spur Gear 1 DTXC1523 1 5x11mm Spur Gear 1 DTXC1547 2 5x11mm Output Shaft 1 DTXC1547 2 5x11mm Front Axles 1 DTXC1547 2 5x11mm Rear Axles 1 DTXC1547 jxs 07/23/14 ir/jxs &