Tamiya TAM58577
$157.50
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1/10 Novafox 2WD Off-Road Buggy Kit
This is the Electric Powered, Radio Controlled, 1/10 scale
Novafox Buggy Kit from Tamiya.
**Improved Re-release Version of 2WD Racing Buggy from 1985.**
Drive: Rear wheel with dogbone type driveshaft
Motor: 540 size brushed
Pinion Gear: 15T metal
Electronic Speed Control: Tamiya TEU105BK with reverse
Body: Clear molded polycarbonate with white plastic helmeted driver
figure
Suspension: Four wheel independent with front stabilizer bar
Shocks: Oil-filled, plastic body, front mono shock, two rear CVA
shocks
Gearbox: Sealed
Differential: Bevel gear
Camber Tie Rods: Fixed non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bell-crank type with servo saver and adjustable linkage
Tires: Front grooved, 0.82" (21mm) wide, 3.3" (84mm) diameter
Rear pin spike, 1.45" (37mm) wide, 3.4" (87mm) diameter
Wheels: Gold colored metal plated plastic, Front 0.79" (20mm) wide
2.2" (56mm), Rear 1.2" (32mm) wide, 2.0" (50mm) diameter
ESC, Wheels, Tires, Decals, and Instruction Manual
Battery: 7.2V 6-cell stick with Standard connector
Polycarbonate safe spray or brush on paint
Building and track equipment
length: 16.7" (425mm)
width: 8.8" (225mm)
height: 5.2" (133mm)
Body,
length: 12.25" (311mm)
width: 5.3" (136mm)
height: 3.2" (81mm)
colors; PS-4 Blue, TAMR8604
PS-5 Black, TAMR8605
X-18 Semi Gloss Black, TAMR1518
XF-15 Flat Flesh, TAMR1715
For Replacement or to Upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x8mm Counter Gear 1 DTXC1523
2 5x11mm Gearbox 1 DTXC1547
4 5x11mm Rear Hubs 2 DTXC1547
4 5x11mm Front Hubs 2 DTXC1547
jxs 08/30/13
ir/jxs
Novafox Buggy Kit from Tamiya.
**Improved Re-release Version of 2WD Racing Buggy from 1985.**
FEATURES:
Chassis: ABS resin, monocoque design Drive: Rear wheel with dogbone type driveshaft
Motor: 540 size brushed
Pinion Gear: 15T metal
Electronic Speed Control: Tamiya TEU105BK with reverse
Body: Clear molded polycarbonate with white plastic helmeted driver
figure
Suspension: Four wheel independent with front stabilizer bar
Shocks: Oil-filled, plastic body, front mono shock, two rear CVA
shocks
Gearbox: Sealed
Differential: Bevel gear
Camber Tie Rods: Fixed non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bell-crank type with servo saver and adjustable linkage
Tires: Front grooved, 0.82" (21mm) wide, 3.3" (84mm) diameter
Rear pin spike, 1.45" (37mm) wide, 3.4" (87mm) diameter
Wheels: Gold colored metal plated plastic, Front 0.79" (20mm) wide
2.2" (56mm), Rear 1.2" (32mm) wide, 2.0" (50mm) diameter
YOU WILL RECEIVE:
Novafox Buggy Kit, with Clear Body, Driver Figure, Brushed Motor, ESC, Wheels, Tires, Decals, and Instruction Manual
REQUIREMENTS:
Radio: 2-channel with high torque steering servo Battery: 7.2V 6-cell stick with Standard connector
Polycarbonate safe spray or brush on paint
Building and track equipment
SPECIFICATIONS:
Vehicle, length: 16.7" (425mm)
width: 8.8" (225mm)
height: 5.2" (133mm)
Body,
length: 12.25" (311mm)
width: 5.3" (136mm)
height: 3.2" (81mm)
COMMENTS:
To paint body to match photos on box, order the following Tamiya colors; PS-4 Blue, TAMR8604
PS-5 Black, TAMR8605
X-18 Semi Gloss Black, TAMR1518
XF-15 Flat Flesh, TAMR1715
For Replacement or to Upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x8mm Counter Gear 1 DTXC1523
2 5x11mm Gearbox 1 DTXC1547
4 5x11mm Rear Hubs 2 DTXC1547
4 5x11mm Front Hubs 2 DTXC1547
jxs 08/30/13
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov