Tamiya TAM58559
$255.20
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Ferrari F2012 (F104) Kit
1/10 scale, electric powered, radio controlled
Ferrari F2012 F104 On-Road Racing Car kit from Tamiya.
Chassis: F-104 0.12" (3.2mm) thick composite fiber glass, 0.079" (2mm) thick composite fiber glass upper
deck
Drive: Two wheel direct
Motor: 540 type
Differential: Ball type with aluminum housing
Ball Bearings: Full set
Body: Clear, untrimmed with separate front and rear wing, side pontoons and molded white driver helmet
Steering: Isometric steering rods links with longitudinally mounted steering servo position
Suspension: Front, kingpin coil with spacers for ground clearance adjustment, Rear, T-bar with carbon friction plate and friction shock
Tires: Rubber slicks, front 1.2" (30mm) wide, 2.4" (62mm) diameter
rear 1.3" (33mm) wide, 2.4" (62mm) diameter
Wheels: Black, front 1.8" (45mm) diameter, 1.2" (30mm) wide rear 1.8" (45mm) diameter, 1.4" (35mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable by changing upper suspension mount installation
module 63 tooth spur gear, decals, body, friction shock,
instruction manual, and 17 tooth pinion gear
Radio: 2-channel, small ESC and receiver recommended, standard servo
Radio Batteries: Eight AA
Battery: 6-cell stick pack with Tamiya type connector
Battery Charger: Peak type recommended
Building and track equipment
Vehicle-
length: 16.4" (417mm)
width: 7.2" (183mm)
height: 3.9" (99mm)
Wheelbase: 10.6" (270mm)
Weight: 28.4oz (805g)
Body-
length: 15" (381mm)
width: 5" (128mm) at widest point
height: 2.7" (70mm)
description revised by: DB March 20, 2013
Ferrari F2012 F104 On-Road Racing Car kit from Tamiya.
FEATURES:
deck
Drive: Two wheel direct
Motor: 540 type
Differential: Ball type with aluminum housing
Ball Bearings: Full set
Body: Clear, untrimmed with separate front and rear wing, side pontoons and molded white driver helmet
Steering: Isometric steering rods links with longitudinally mounted steering servo position
Suspension: Front, kingpin coil with spacers for ground clearance adjustment, Rear, T-bar with carbon friction plate and friction shock
Tires: Rubber slicks, front 1.2" (30mm) wide, 2.4" (62mm) diameter
rear 1.3" (33mm) wide, 2.4" (62mm) diameter
Wheels: Black, front 1.8" (45mm) diameter, 1.2" (30mm) wide rear 1.8" (45mm) diameter, 1.4" (35mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable by changing upper suspension mount installation
YOU WILL RECEIVE:
Tamiya F104 Pro On-Road Racing Car kit, tires, wheels, motor, 06module 63 tooth spur gear, decals, body, friction shock,
instruction manual, and 17 tooth pinion gear
REQUIREMENTS:
Radio Batteries: Eight AA
Battery: 6-cell stick pack with Tamiya type connector
Battery Charger: Peak type recommended
Building and track equipment
SPECIFICATIONS:
length: 16.4" (417mm)
width: 7.2" (183mm)
height: 3.9" (99mm)
Wheelbase: 10.6" (270mm)
Weight: 28.4oz (805g)
Body-
length: 15" (381mm)
width: 5" (128mm) at widest point
height: 2.7" (70mm)
COMMENTS:
description revised by: DB March 20, 2013
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov