Tamiya TAM58521
$249.60
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1/12 Newman Joest Racing Porsche RM-01 Kit
This is the electric powered, radio controlled, 1/12 scale
New Man Joest Racing Porsche 956 On-Road Race Car Kit.
Drive: Rear wheel direct, steel rear axle
Motor: 380 size brushed (540 motor, not included, can be installed
with the removal of motor plate adapter)
Front Suspension: Independent design with optimized kingpin trail
for increased stability
Rear Suspension: Pivot-Ball Link Rear (PBLR) with center pivot ball
pitch damper to control chassis pitch, roll damper and side links
to control chassis roll
Differential: Ball type
Wheels: White plastic 1.4" (36.2mm) diameter, front 0.94" (24mm) wide
rear, 1.4" (35.5mm) wide, hex hub type and 3-screw wheels can be
used with this chassis
Tires: High grip sponge design 1.9 (47.5mm) outer diameter, front
0.98" (25mm) wide, rear 1.2" (32mm) wide
Body: Clear untrimmed polycarbonate plastic with white plastic
helmeted driver head
Spur Gear: Plastic 63T 06 module
Body, Decals 14T Pinion Gear and Instruction Manual
Battery: 2S 7.4V LiPo (#55105 6.6V LiFe battery recommended by
Tamiya not available in USA)
ESC: Compatible with included motor
Battery Charger: LiPo compatible
Polycarbonate safe spray or brush on paint
Building and track equipment
Wheelbase: 7.9" (201mm)
Body;
length: 14.5" (368mm)
width: 6.5" (165mm)
height: 2.8" (71mm)
Qty. Size Location Qty. Bearing Set
1 6x12mm Ball Diff 1 DTXC1569
1 6x10mm Ball Diff 1 DTXC1561
1 5x11mm Ball Diff 1 DTXC1547
2 6x10mm Rear Wheels 1 DTXC1561
4 5x11mm Front Wheels 1 DTXC1547
jxs 05/03/12
ir/jxs
&
New Man Joest Racing Porsche 956 On-Road Race Car Kit.
FEATURES:
Chassis: 0.098" (2.5mm) thick composite fiber glass lower deck Drive: Rear wheel direct, steel rear axle
Motor: 380 size brushed (540 motor, not included, can be installed
with the removal of motor plate adapter)
Front Suspension: Independent design with optimized kingpin trail
for increased stability
Rear Suspension: Pivot-Ball Link Rear (PBLR) with center pivot ball
pitch damper to control chassis pitch, roll damper and side links
to control chassis roll
Differential: Ball type
Wheels: White plastic 1.4" (36.2mm) diameter, front 0.94" (24mm) wide
rear, 1.4" (35.5mm) wide, hex hub type and 3-screw wheels can be
used with this chassis
Tires: High grip sponge design 1.9 (47.5mm) outer diameter, front
0.98" (25mm) wide, rear 1.2" (32mm) wide
Body: Clear untrimmed polycarbonate plastic with white plastic
helmeted driver head
Spur Gear: Plastic 63T 06 module
YOU WILL RECEIVE:
New Man Joest Racing Porsche 956 On-Road Race Car Kit, Tires, Wheels Body, Decals 14T Pinion Gear and Instruction Manual
REQUIREMENTS:
Radio: 2-channel with standard size steering servo Battery: 2S 7.4V LiPo (#55105 6.6V LiFe battery recommended by
Tamiya not available in USA)
ESC: Compatible with included motor
Battery Charger: LiPo compatible
Polycarbonate safe spray or brush on paint
Building and track equipment
SPECIFICATIONS:
Vehicle Wheelbase: 7.9" (201mm)
Body;
length: 14.5" (368mm)
width: 6.5" (165mm)
height: 2.8" (71mm)
COMMENTS:
To replace Ball Bearings use: Qty. Size Location Qty. Bearing Set
1 6x12mm Ball Diff 1 DTXC1569
1 6x10mm Ball Diff 1 DTXC1561
1 5x11mm Ball Diff 1 DTXC1547
2 6x10mm Rear Wheels 1 DTXC1561
4 5x11mm Front Wheels 1 DTXC1547
jxs 05/03/12
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov