Tamiya TAM58472

This is the 1/10 scale electric powered, radio controlled, Tamiya Raybrig HSV-010 On-Road Race Car Kit. Chassis: TA05 version II plastic bathtub type, version II features reduced width for greater ground clearance during chassis rolls Drive: Four wheel two belt drive, tension adjustable Motor: 540 motor with pre-attached leads Ball Bearings: Full set included Shocks: Four oil filled CVA Super Mini plastic body Gearboxes: Enclosed, front and rear Differentials: Ball type, 37 tooth with 18 tooth center pulley Transmission: Single speed Tires: Slick racing tire with foam inserts, 0.94" (24mm) wide, 2.5" (64mm) outer diameter Wheels: One-piece 6-spoke black in color, 0.94" (24mm) wide, 1.9" (48mm) diameter with +2° offset Body: Lightweight polycarbonate clear Raybrig HSV-010 with body trim and sponsor decals and black rear wing Bumpers: Foam front bumper Suspension: IFS (Inboard Front Suspension) with horizontally mounted shocks with push rod and rocker arm, front and rear lightweight reversible arms for fine tuning, double wishbone rear suspension Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bell-crank type with servo saver Tamiya Raybrig HSV-010 Kit, 540 motor, clear body with rear wing and side mirrors, tires with foam inserts, wheels, 20 tooth pinion gear 70 tooth spur gear, decal sheet and instructions Radio: 2-channel with 1 standard servo and electronic speed control Radio Batteries: 8 AA size Battery: 6 flat pack with standard connector Charger: AC/DC Timed or Peak for 6-cell battery Paint: Spray or brush-on for Lexan body Misc. Items: Building and track equipment VEHICLE- Length: 14.7" (373mm) Width: 7.4" (188mm) Wheelbase: 10" (257mm) Tread: 6.5" (165mm) distance between wheel centers side to side Gear Ratio: 7.19:1 BODY- Length: 16.5" (419mm) Width: 7.7" (195mm) Height: 4" (102mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 10 x 15mm Front Ball Diff 1 DTXC1595 2 10 x 15mm Rear Ball Diff 1 DTXC1595 2 5 x 8mm Front Ball Diff 1 DTXC1523 2 5 x 8mm Rear Ball Diff 1 DTXC1523 2 4 x 8mm flanged, Center Pulley 1 DTXC1517 2 5 x 10mm Front Axles 1 DTXC1535 2 5 x 10mm Rear Axles 1 DTXC1535 4 5 x 8mm Steering Arms 2 DTXC1523 jxs 02/18/11 ir/jxs &