Tamiya TAM84412

This is the Radio Controlled, Electric Powered 1/10 scale Tamiya TB-04R On-Road Chassis Kit. Includes the following tune-up parts; **TRF-418 design Suspension Arms, & Front and Rear Uprights** **TRF Big Bore Dampers** **Aluminum Suspension Mounts (1A x2pcs., 1XB, 1D)** **54592 TB-04 Front Direct Coupling** **Rear Gear Differential Unit** **TB-04 Aluminum Steering Arms** **Aluminum Turnbuckle Shafts** **Hex Screws** **Two Lightweight Rear Universal Shafts** **TB-04R Carbon Front/Rear Damper Stays** **54578 06 Hard Coated Aluminum 25T Pinion Gear** **TB-04 Aluminum Steering Bridge** **Front Double Cardan 44mm Drive Shafts** **Full Ball Bearings** Chassis: Carbon reinforced plastic Drive: Four wheel shaft drive with dogbone driveline, front direct coupling (spool) Transmission: Newly designed case provides increased stability during acceleration Rear Differential: Sealed gear type Suspension: Short reversible double wishbone, IFS (inboard front suspension) positions front shocks horizontal and low to the chassis to enable usage of low profile sports car bodies Shocks: TRF Big Bore, oil-filled, titanium coated shafts Shock Towers: Carbon plate 0.12" (3mm) thick Steering: Bell crank with servo saver, long steering tie-rod system refined from the TRF417 chassis Motor Mount: Aluminum Ball Bearings: Full set of shielded bearings Bumper: Front foam Spur Gear: 66T plastic Track: Adjustable, outer edges of wheels measured side-to-side Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis TB-04R On-Road Chassis Kit with Decals, Shocks, Shock Oil, Spur Gear and Instructions Radio: 2-channel with steering servo AA Batteries for Transmitter ESC: Compatible with selected motor Motor: 540 size Pinion Gear: 06 module Battery: NiMH 7.2V 6-cell stick pack Charger: To match selected battery Body: 1/10 scale on-road car Wheels: 1.9" (48mm) diameter, 1" (25.4mm) wide, Tires: Medium narrow 0.94" (24mm) wide, with inserts Building and track equipment Length: 14.6" (370mm) Width: 7.4" (187mm) Wheelbase: 10.1" (257mm) For Replacement or to Upgrade To Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 10x15mm Front Diff 2 DTXC1595 4 5x8mm Front Diff 2 DTXC1523 1 5x10mm Rear Pilot Shaft 1 DTXC1535 1 5x10mm flanged Rear Pilot Shaft 1 DTXC1541 1 4x8mm Spur Gear 1 DTXC1511 1 4x8mm flanged Spur Gear 1 DTXC1517 1 5x11mm Transmission Shaft 1 DTXC1547 1 5x9mm Transmission Shaft 1 DTXC1531 2 5x10mm Front Gearbox 1 DTXC1535 4 5x10mm Front Uprights 2 DTXC1535 2 5x10mm Rear Gearbox 1 DTXC1535 4 5x10mm Rear Axles 2 DTXC1535 2 3x7mm Steering Linkage 1 DTXC1506 jxs 07/08/15 ir/jxs &