Tamiya TAM84071

$223.88
Tamiya logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
1:10 Jeep Wrangler 4WD CC-01 Kit
Tamiya TAM84071 - 1:10 Jeep Wrangler 4WD CC-01 Kit

Tamiya brand 1/10 scale electric powered, radio controlled, 4WD
J33P Wrangler Off-Road Kit from Tamiya.
FEATURES:

Chassis: CC-01, plastic tub construction
Drive: Four wheel drive, shaft driven
Motor: 540 electric motor
Electronic Speed Control: TEU-104BK with reverse
Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights,
see COMMENTS
Shocks: CVA oil-filled, black plastic bodies
Gearbox: Front and rear sealed gearbox
Differentials: Planetary gear, rear differential may be locked
during assembly
Transmission: Single speed
Tires: Semi-pneumatic all-terrain, rubber construction 1.2 (30mm)
wide, 3.5 (90mm) diameter
Wheels: Four mesh gold colored plastic, 1 (26mm) wide, 1.9 (48mm)
diameter
Bumper: Front, plastic construction, black in color
Body: Injection molded ABS resin
Suspension: Front, long stroke double wishbone
Rear, four link rigid
Camber Tie Rods: Fixed non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bell-crank type with servo saver and adjustable linkage
YOU WILL RECEIVE:

Tamiya J33P Wrangler kit with oil-filled shocks, 540 motor, ESC,
body, tires, wheels, LED light kit, shock oil, 16 tooth
pinion gear, spur gear, instructions
REQUIREMENTS:

Radio: 2-Channel with 1 Servo
Eight AA batteries for transmitter
Battery: 6-cell stick pack w/ standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
SPECIFICATIONS:

VEHICLE-
length: 16.8 (426mm)
width: 7.7 (195mm)
height: 8.5 (215mm)
Weight: 53.3oz (1510g)
Wheelbase: 9.9 (252mm)
BODY-
length: 15 (381mm)
width: 7.25 (184mm) at widest point
height: 5.3 (135mm)
COMMENTS
The TLU-02 Light Control Unit (not included) can be installed for
more light effects, order TAMC1477.
For Replacement or to Upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Spur Gear 1 DTXC1547
1 5x8mm Spur Gear 1 DTXC1523
2 5x11mm Fr Diff 1 DTXC1547
1 5x11mm Drive Gear 1 DTXC1547
1 5x8mm Drive Gear 1 DTXC1523
4 10x15mm Front Hubs 2 DTXC1595
4 5x11mm Rear Axle Shafts 2 DTXC1547
1 5x11mm Rear Prop Joint 1 DTXC1547
1 5x8mm Rear Prop Joint 1 DTXC1547
jxs 10/27/11
ir/jxs
This item is out of stock
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov