Tamiya TAM58334

$123.11
Tamiya logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
discontinued 1:10 High Performance Rising Storm
Tamiya TAM58334 - discontinued 1:10 High Performance Rising Storm

This is the 1/10 scale electric powered, radio controlled,
Tamiya Rising Storm off-road Racing Buggy kit.
FEATURES:
Chassis: Plastic DF-02 style bathtub
Drive: Four wheel shaft drive
Motor: 540 size
Ball Bearings: Bearings located on spur gear shaft and inside diff
case, bushings located on wheels
Shocks: Four oil-filled plastic bodied
Gearboxes: Sealed front and rear
Differentials: Planetary gear
Transmission: Single-speed
Body: Clear untrimmed buggy style with rear wing
Tires: Spike treaded, Front, 3.25" (82mm) diameter, 1" (25mm) wide
Rear, 3.25" (82mm) diameter, 1.5" (38mm) wide
Wheels: 5-spoke White, Front, 2.25" (57mm) diameter, 1" (25mm) wide
Rear, 2.25" (57mm) diameter, 1.5" (38mm) wide
Speed Control: Electronic, with reverse and Kyosho type connector
Bumpers: Front and rear Black plastic
Suspension: Double wishbone
Camber Tie Rods: Fixed non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering Tie Rods: Adjustable, caster/toe-in refers to the angle at
which the tires point inward as viewed from above
Steering: Bell-crank type
Servo Saver: Included
YOU WILL RECEIVE:
One Tamiya Rising Storm off-road Racing Buggy with electronic speed
control, unpainted body, tires, wheels, 19 tooth pinion gear, 70
tooth spur gear, decal sheet and instructions
REQUIREMENTS:
Radio: 2-ch radio W/BEC RX and a standard servo
Radio Batteries: Eight AA size
Battery: 6-cell flat with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Misc. Items: Building and track equipment
SPECIFICATIONS:
VEHICLE-
length: 15.5" (395mm)
width: 9.8" (249mm)
height: 5.9" (150mm)
Weight: 2.6 lbs (1195g) without battery
Wheelbase: 10.5" (267mm)
Front Tread: 8.6" (219mm) side to side at wheel centers
Rear Tread: 8.25" (209mm)
Front Track: 9.5" (241mm)
Rear Track: 9.6" (245mm)
Ground Clearance: 1" (25.4mm)
Tires- Front: 2.25" x 1" (57mm x 25mm)
Rear: 3.25" x 1" (82mm x 25mm)
BODY-
length: 9.9" (251mm)
width: 6.4" (162mm) at widest point
2.5" (63mm) behind from wheels (thinnest point)
height: 2.7" (70mm)
COMMENTS:
For replacement or upgrade to Ball Bearings use:
Qty. Size Location Order Bearing Set Qty.
4 5x11mm Front Wheels 2 DTXC1547
4 5x11mm Rear Wheels 2 DTXC1547
4 5x11mm Spur Gear Shaft 2 DTXC1547
2 8x12mm Differential 1 DTXC1581
Body pictured on the box is painted Hot Pink and White with all
decals applied.
jxs 1/15/04
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov