Tamiya TAM58467

This is the radio controlled, electric powered, 1/10 scale Castrol Honda Civic VTi Kit from Tamiya. This kit can be used in Tamiya Official Races. Chassis: FF-03 bathtub type, composite construction Drive: Front wheel Motor: 540 size brushed Wheels: Five-spoke 2" (52mm) diameter, 0.94" (24mm) wide, white in color Tires: Racing slicks with foam inserts, 0.94" (24mm) wide, 2.4" (60mm) outer diameter Bumper: Front urethane Spur Gear: 68 tooth composite Pinion Gear: 26 tooth metal Body: Clear untrimmed, with protective coating on outside Differential: Ball type Steering: Bellcrank type equipped with ball bearings Shocks: Oil-filled CVA plastic bodied Suspension: IFS (Inboard Front Suspension) with short reversible suspension arms and TRF416 uprights Wheelbase: Kit can be assembled with long (10.1" 257mm), medium (9.6" 245mm) or short (9.2" 233mm) wheelbase by altering the rear assembly Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis 1/10 scale Castrol Honda Civic CV VTi FF-03 Chassis Kit, wheels, tires, foam inserts, decals, shock oil, spur gear, pinion gear, motor and instruction manual Radio: 2-channel Electronic Speed Control: For brushed motors Paint: Spray or brush-on polycarbonate safe Building and track equipment Chassis- Length: 15.1" (384mm) Width: 7.3" (185mm) Tread: 6.2" (157mm) center of tires, side-to-side Wheelbase: 10.1" (257mm) 9.6" (245mm) 9.2" (233mm) Body- Length: 16.1" (409mm) Width: 6.8" (172mm) Height: 3.8" (98mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 5x8mm Differential 1 DTXC1523 2 5x10mm Idler Gear 1 DTXC1535 1 4x8mm Counter Gear 1 DTXC1511 4 5x8mm Steering 2 DTXC1523 4 5x10mm Front Axles 2 DTXC1535 4 5x10mm Rear Axles 2 DTXC1535 jxs 07/26/10 ir/jxs &