Tamiya TAM84383
$169.60
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1:10 Hornet Black Metallic Ltd Edition Kit
Tamiya brand radio controlled, electric powered, 1/10 scale
Tamiya Hornet Off Road Racer
with Limited Edition Body with Black Metallic Finish.
Chassis: Molded from A. B. S. resin, bathtub style, plastic side
bumpers
Drive: Rear wheel drive
Body: Molded and pretrimmed polycarbonate with limited edition black
metallic finish to commemorate thirty years since the release of
the original
Electronic Speed Control: Tamiya TBLE-02S, set for use with
included brushed motor, may also be used with the Tamiya brushless
motor 01 sensored series
Motor: Mabuchi RS540SH (bushing/sealed endbell)
Plastic bushings
Shocks: Coil-over friction in front and aluminum body oil-filled in
the rear
Gearbox: Sealed rear gearbox
Differentials: Bevel gear
Transmission: Single speed
Tires: 1.4 spiked on the rear and 1.4 ribbed on the front
Wheels: 5-spoke, 3-piece black plastic wheels
Bumpers: Large black plastic tube type front bumper
Suspension: Independent front A-arm and rear rolling rigid axle
Camber Tie Rods: Fixed non-adjustable
Steering Tie Rods: Adjustable
Steering: Two steering rods attach to the servo saver and knuckle arm
servo saver included
Hornet rolling chassis with rear oil-filled shocks, 540 motor,
Electronic Speed Control, body, tires, 3-piece wheels, 19
tooth 32 pitch pinion gear, 50 tooth counter gear, decal sheet and
instruction manual
Radio: 2-Channel with steering servo
Radio Batteries: AA size
Battery: 6-cell stick pack w/standard connector (7-cell won't fit)
Charger: AC/DC Timed or Peak for 6-cell battery
Misc. Items: Building and track equipment
VEHICLE-
length: 15.74 (400mm)
width: 9.05 (230mm)
height: 5.90 (150mm)
Weight: 1.92lbs (874g)(approx. )
Tires- Front: 1.4 ID - 2.85 OD - .80 wide
Rear: 1.4 ID - 3.75 OD - 1.75 wide
BODY-
length: 13 (330mm)
width: 5.5 (139mm) at rear wheels (widest point)
2.25 (57mm) behind from wheels (thinnest point)
height: 2.8 (72mm)
COMMENTS
To upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set Qty.
1 5x8mm Counter Gear 1 DTXC1523
5 5x11mm Gearbox 3 DTXC1547
4 5x11mm Front Wheels 2 DTXC1547
jxs 09/08/14
ir/jxs
Tamiya Hornet Off Road Racer
with Limited Edition Body with Black Metallic Finish.
FEATURES:
Chassis: Molded from A. B. S. resin, bathtub style, plastic side
bumpers
Drive: Rear wheel drive
Body: Molded and pretrimmed polycarbonate with limited edition black
metallic finish to commemorate thirty years since the release of
the original
Electronic Speed Control: Tamiya TBLE-02S, set for use with
included brushed motor, may also be used with the Tamiya brushless
motor 01 sensored series
Motor: Mabuchi RS540SH (bushing/sealed endbell)
Plastic bushings
Shocks: Coil-over friction in front and aluminum body oil-filled in
the rear
Gearbox: Sealed rear gearbox
Differentials: Bevel gear
Transmission: Single speed
Tires: 1.4 spiked on the rear and 1.4 ribbed on the front
Wheels: 5-spoke, 3-piece black plastic wheels
Bumpers: Large black plastic tube type front bumper
Suspension: Independent front A-arm and rear rolling rigid axle
Camber Tie Rods: Fixed non-adjustable
Steering Tie Rods: Adjustable
Steering: Two steering rods attach to the servo saver and knuckle arm
servo saver included
YOU WILL RECEIVE:
Hornet rolling chassis with rear oil-filled shocks, 540 motor,
Electronic Speed Control, body, tires, 3-piece wheels, 19
tooth 32 pitch pinion gear, 50 tooth counter gear, decal sheet and
instruction manual
REQUIREMENTS:
Radio: 2-Channel with steering servo
Radio Batteries: AA size
Battery: 6-cell stick pack w/standard connector (7-cell won't fit)
Charger: AC/DC Timed or Peak for 6-cell battery
Misc. Items: Building and track equipment
SPECIFICATIONS:
VEHICLE-
length: 15.74 (400mm)
width: 9.05 (230mm)
height: 5.90 (150mm)
Weight: 1.92lbs (874g)(approx. )
Tires- Front: 1.4 ID - 2.85 OD - .80 wide
Rear: 1.4 ID - 3.75 OD - 1.75 wide
BODY-
length: 13 (330mm)
width: 5.5 (139mm) at rear wheels (widest point)
2.25 (57mm) behind from wheels (thinnest point)
height: 2.8 (72mm)
COMMENTS
To upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set Qty.
1 5x8mm Counter Gear 1 DTXC1523
5 5x11mm Gearbox 3 DTXC1547
4 5x11mm Front Wheels 2 DTXC1547
jxs 09/08/14
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov