Tamiya TAM84316

Tamiya brand radio controlled, electric powered, 1/10 scale
Volkswagen Golf Mk.1 On-Road kit from Tamiya.
Chassis: M5 resin monocoque design, composite construction with
extensions to build a short, medium or long wheelbase chassis
Drive: Front wheel
Shocks: Plastic body friction type
Shock Towers: Composite construction
Motor: 540 size
Electronic Speed Control: Tamiya TEU-105BK with reverse, TAMM5055
Gearbox: Sealed, integral with chassis
Transmission: Single speed, ball bearing equipped
Differential: Three bevel gear
Body: Clear untrimmed polycarbonate with predrilled body post holes
Suspension: Four wheel independent double wishbone
Tires: Slick rubber 0.98 (25mm) wide, 2.2 (56mm) diameter with foam
inserts
Wheels: Plastic, gray in color 0.94 (24mm) wide, 1.5 (38mm)
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Three piece tie-rod linkage
M-05 chassis, tires, wheels, foam inserts, VW Golf Mk.2 body, decals,
20 tooth pinion gear, shocks, ESC, motor and instruction manual
Radio: 2-channel
AA Batteries: 8 for transmitter
Battery: 6-cell stick with standard connector
Battery Charger: Peak type recommended
Building and track equipment
Vehicle;
length: 14.4 (365mm)
width: 6.7 (170mm)
height: 5.6 (142mm)
Wheelbases: 8.3 (210mm), 8.8 (225mm), 9.4 (239mm)
Tread: 5.4 (138mm) center of wheels, side-to-side
Body;
length: 12.7 (323mm)
width: 5.9 (150mm)
height: 3.8 (98mm)
For Replacement or to Upgrade To Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 5x8mm Counter Gear 1 DTXC1523
1 5x11mm Counter Gear 1 DTXC1547
1 5x8mm Spur Gear 1 DTXC1523
1 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Output Shaft 1 DTXC1547
2 5x11mm Front Axles 1 DTXC1547
2 5x10mm Rear Axles 1 DTXC1535
jxs 05/03/13
ir/jxs