Tamiya TAM84191
$131.09

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1:10 Team Lotus 99t Honda F103 Chassis
This is the 1/10 scale, electric powered, radio controlled
Tamiya Team Lotus 99T Race Car Kit.
Chassis: F103 FRP, fiber reinforced plastic 0.10" (2.5mm) thick
Drive: Rear wheel direct drive with height adjustable gear case
Motor: Tamiya 540-J stock motor
Differential: Ball type
Suspension: Front; independent king pin coil spring, Rear; friction
shock and coil springs attached to T-bar, rear suspension ball
mount
Shock: Single friction type horizontally mounted at rear suspension
Ball Bearings: Full set
Body: Clear, untrimmed polycarbonate
Spoiler: Front, molded in yellow plastic
Spur Gear: Plastic, 63 tooth
Pinion Gear: 17 tooth aluminum
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Tires: Front; foam 2.2" (57mm) diameter, 1.1" (29mm) wide
Rear; foam 2.4" (60mm) diameter, 1.8" (45mm) wide
Wheels: Two-piece plastic 5-spoke, black in color, Front; 1.4"
(36mm) diameter 1.2" (30mm) wide, Rear; 1.4" (36mm) diameter, 1.7"
(44mm) wide
Steering: Bell crank type with servo saver, steering servo is
longitudinally placed to apply an isometric steering load
Tamiya Team Lotus 99T Race Car Kit with 540 motor, pinion gear, spur
gear, tires, wheels, body, front and rear wings, friction shock,
decal sheet and instruction manual
Radio: 2-channel with one servo
Electronic Speed Control: For stock motor
Battery: 6-cell 7.2V stick NiCD or NiMH (7-cell will not fit)
OR 2S LiPo battery
Charger: Depending on battery type
Misc Items: Tools and track equipment
Vehicle-
Length: 15.9" (405mm)
Width: 7.9" (200mm)
Height: 4.2" (107mm)
Weight: 23.2oz (660g)
Body-
Length: 13.4" (340mm)
Width: 5.7" (145mm)
Height: 3.3" (84mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x8mm Front Wheels 2 DTXC1523
2 10x6mm Rear Wheels 1 DTXC1561
3 8x12mm Ball Diff 2 DTXC1581
To paint body to match the photos on box, order;
TAMR8604 PS-4 Blue TAMR8401 XF-1 Flat Black
TAMR8605 PS-5 Black TAMR8402 XF-2 Flat White
TAMR8606 PS-6 Yellow TAMR8415 XF-15 Flat Flesh
TAMR5026 TS-26 Pure White
jxs 02/04/09
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS: