Tamiya TAM84106

This is the 1/10 scale, electric powered, radio controlled F104 Pro On-Road Limited Edition Racing Car kit. Chassis: PRO specification 0.12" (3.2mm) thick carbon fiber, 0.079" (2mm) thick carbon fiber upper deck Drive: Two wheel direct with carbon drive shaft Motor: 540 type Differential: Ball type with aluminum housing Ball Bearings: Full set Body: 0.03" (0.7mm) thick, clear untrimmed with separate rear wing side pontoons and molded white driver helmet Steering: Isometric steering rods links with longitudinally mounted steering servo position Suspension: Front, kingpin coil with spacers for ground clearance adjustment, Rear, T-bar with carbon friction plate and TRF oil- filled shock Tires: Foam front 1.1" (28mm) wide, 2.4" (62mm) diameter rear 1.4" (36mm) wide, 2.4" (62mm) diameter Wheels: 10 spoke black front 1.2" (30mm) wide, 1.7" (43mm) diameter rear 1.4" (35mm) wide, 1.7" (43mm) diameter Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-adjustable Tamiya F104 Pro On-Road Racing Car kit, tires, wheels, motor, 04 module spur gear, decals, body, shock oil, instruction manual, oil-filled shock and 25 tooth pinion gear Radio: 2-channel, small ESC and receiver recommended, standard servo Radio Batteries: Eight AA Battery: 6-cell stick pack with Tamiya type connector Battery Charger: Peak type recommended Building and track equipment Vehicle- Length: 16.1" (410mm) Width: 7.1" (180mm) Wheelbase: 10.6" (270mm) Tread: Front, 5.9" (150mm), Rear, 5.7" (145mm) measurement at center of wheels, side-to-side Body- Length: 14.1" (358mm) Width: 4.8" (122mm) at widest point Height: 3.5" (89mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 6x10mm Rear Shaft 1 DTXC1561 2 8x12mm Ball Diff 1 DTXC1581 1 5x11mm Diff Housing 1 DTXC1547 4 5x10mm Front Wheels 2 DTXC1535 4 5x10mm Rear Wheels 2 DTXC1535 jxs 02/25/10 ir/jxs &