Tamiya TAM58668
$170.80
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Van Type 2 T1 M-06 Kit W/ Motor & Esc
This Tamiya R/C model assembly kit depicts the 1st-generation (T1) variant of the Type 2 van, which was introduced in 1950 and also known as the Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic body is paired with the rear-wheel drive M-06 chassis for realistic fun driving just like the real RR Type 2 T1.
- 1/10 scale R/C model assembly kit
- Polycarbonate body with separate molded plastic parts included to create bumper, light cases and side mirrors
- The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C radio gear positioned on either side for optimum balance and a low center of gravity
- 239mm wheelbase M-06L chassis
- Metal-plated dish type wheels
- Includes 540 motor
- Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
- M-06 Chassis Kit with tires, one set of wheels, foam inserts, VW Type 2 T1 body, 20T pinion gear, shocks, decal sheet, instruction manual, 540 brush equipped motor
- Radio system (transmitter and receiver)
- Steering servo
- 7.2-7.4 volt battery pack & compatible charger
- Tamiya PS paint
- Adjustable Gear Ratio: Yes
- Bearings: Plastic bushing
- Body: Clear untrimmed Type 2 T1 van
- Body Material: Polycarbonate
- Body Stickers: Included
- Bumper: Front, urethane foam
- Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Chassis Material: ABS Plastic
- Chassis Type: M-06L long wheelbase, molded plastic bathtub style
- Drive: Rear wheel
- Construction Type: Assembly Kit
- Differential Type: Planetary gear type
- Drive Type: 2WD
- Electronic Speed Control (esc): Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
- Motor: Brushed 540 Type
- Scale: 1/10
- Shock Damper: CVA Oil Filled
- Steering: Bell-crank type with high torque servo saver
- Suspension: 4-wheel fully independent double wishbone
- Terrain Use: On-Road
- Tires: 60D on-road 0.94" (24mm) wide, 2.2" (56mm) diameter, with foam inserts
- Wheels: Gray plastic 0.94" (24mm) wide, 1.5" (38mm) diameter
description revised by: SN October 21, 2019
FEATURES:
- M-06 Chassis: The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C radio gear positioned on either side for optimum balance and low center of gravity. 4-wheel double wishbone suspension is equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. - 1/10 scale R/C model assembly kit
- Polycarbonate body with separate molded plastic parts included to create bumper, light cases and side mirrors
- The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C radio gear positioned on either side for optimum balance and a low center of gravity
- 239mm wheelbase M-06L chassis
- Metal-plated dish type wheels
- Includes 540 motor
- Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
YOU WILL RECEIVE:
- One (1) car kit, as described- M-06 Chassis Kit with tires, one set of wheels, foam inserts, VW Type 2 T1 body, 20T pinion gear, shocks, decal sheet, instruction manual, 540 brush equipped motor
REQUIREMENTS:
- Assembly- Radio system (transmitter and receiver)
- Steering servo
- 7.2-7.4 volt battery pack & compatible charger
- Tamiya PS paint
SPECIFICATIONS:
- Wheelbase: 239mm- Adjustable Gear Ratio: Yes
- Bearings: Plastic bushing
- Body: Clear untrimmed Type 2 T1 van
- Body Material: Polycarbonate
- Body Stickers: Included
- Bumper: Front, urethane foam
- Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Chassis Material: ABS Plastic
- Chassis Type: M-06L long wheelbase, molded plastic bathtub style
- Drive: Rear wheel
- Construction Type: Assembly Kit
- Differential Type: Planetary gear type
- Drive Type: 2WD
- Electronic Speed Control (esc): Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit)
- Motor: Brushed 540 Type
- Scale: 1/10
- Shock Damper: CVA Oil Filled
- Steering: Bell-crank type with high torque servo saver
- Suspension: 4-wheel fully independent double wishbone
- Terrain Use: On-Road
- Tires: 60D on-road 0.94" (24mm) wide, 2.2" (56mm) diameter, with foam inserts
- Wheels: Gray plastic 0.94" (24mm) wide, 1.5" (38mm) diameter
description revised by: SN October 21, 2019
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov