Tamiya TAM58592
$301.31
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1:10 Rock Socker Crawler Truck Cr-01
This is the electric powered, radio controlled, 1/10 scale
Tamiya Rock Socker Off Road Rock Crawler Truck Kit.
pressed aluminum channels and resin cross members
Drive: Four wheel solid axle
Motor: 540 size brushed
Ball Bearings: Full set included
Shocks: Oil-filled, plastic body
Gearbox: Planetary type, compact to enable a low center of gravity
Transmission: Single speed
Tires: Rubber, block pattern
Wheels: Black plastic 1.4" (36mm) wide, 2.8" (71.2mm) diameter, 12mm
hex
Body: light weight clear polycarbonate
Bumper: High impact front plastic
Suspension: Solid axle rigid four link with front & rear stabilizers
Differentials: Three bevel gear, lockable to provide better off-road
traction
Steering: Adjustable, direct link with servo saver
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
gear, oil-filled shocks, 540 motor, wheels,
body, tires, decal sheet, spur gear, instructions
Electronic Speed Control: 540 brushed motor compatible
Radio Batteries: AA size
Battery: 6-cell stick pack w/standard Tamiya connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Paint, building and track equipment
length: 17" (435mm)
width: 10.43" (265mm)
height: 10.47" (266mm)
Weight: 5.66lbs (2567g) approx.
Wheelbase: 11.34" (288mm)
Gear Ratio:
BODY-
length: 15.9" (403mm)
width: 5.8" (148mm)
height: 4.2" (106mm)
Qty. Size Location Qty. Bearing Set
4 8x12mm Link Mounts 2 DTXC1581
2 5x10mm Drive Shaft A 1 DTXC1535
2 5x10mm Drive Shaft B 1 DTXC1535
4 5x10mm Front Uprights 2 DTXC1535
4 5x10mm Rear Uprights 2 DTXC1535
6 5x8mm Planetary Gears 3 DTXC1523
1 10x15mm Planetary Gears 1 DTXC1595
To paint body to match color scheme on box, order the following
Tamiya colors;
PS-5 Black, TAMR8605
PS-23 gunmetal, TAMR8623
PS-31 Smoke, TAMC8631
jxs 3/05/14
ir/jxs
&
Tamiya Rock Socker Off Road Rock Crawler Truck Kit.
FEATURES:
Chassis: CR-01 dedicated crawler chassis with heavy duty ladder framepressed aluminum channels and resin cross members
Drive: Four wheel solid axle
Motor: 540 size brushed
Ball Bearings: Full set included
Shocks: Oil-filled, plastic body
Gearbox: Planetary type, compact to enable a low center of gravity
Transmission: Single speed
Tires: Rubber, block pattern
Wheels: Black plastic 1.4" (36mm) wide, 2.8" (71.2mm) diameter, 12mm
hex
Body: light weight clear polycarbonate
Bumper: High impact front plastic
Suspension: Solid axle rigid four link with front & rear stabilizers
Differentials: Three bevel gear, lockable to provide better off-road
traction
Steering: Adjustable, direct link with servo saver
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
YOU WILL RECEIVE:
Tamiya Rock Socker Rock Crawler chassis with 20 tooth pinion gear, oil-filled shocks, 540 motor, wheels,
body, tires, decal sheet, spur gear, instructions
REQUIREMENTS:
Radio: 2-Channel with 1 Servo Electronic Speed Control: 540 brushed motor compatible
Radio Batteries: AA size
Battery: 6-cell stick pack w/standard Tamiya connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Paint, building and track equipment
SPECIFICATIONS:
VEHICLE- length: 17" (435mm)
width: 10.43" (265mm)
height: 10.47" (266mm)
Weight: 5.66lbs (2567g) approx.
Wheelbase: 11.34" (288mm)
Gear Ratio:
BODY-
length: 15.9" (403mm)
width: 5.8" (148mm)
height: 4.2" (106mm)
COMMENTS:
For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set
4 8x12mm Link Mounts 2 DTXC1581
2 5x10mm Drive Shaft A 1 DTXC1535
2 5x10mm Drive Shaft B 1 DTXC1535
4 5x10mm Front Uprights 2 DTXC1535
4 5x10mm Rear Uprights 2 DTXC1535
6 5x8mm Planetary Gears 3 DTXC1523
1 10x15mm Planetary Gears 1 DTXC1595
To paint body to match color scheme on box, order the following
Tamiya colors;
PS-5 Black, TAMR8605
PS-23 gunmetal, TAMR8623
PS-31 Smoke, TAMC8631
jxs 3/05/14
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov