Tamiya TAM58591
$201.60
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1:10 Renault Alpine A110 '71 Monte Carlo Kit
Tamiya brand 1/10 scale, Tamiya Electric Powered, Radio Controlled,
1971 Renault Alpine A110 On-Road Rally Car Kit.
FEATURES:
Chassis: Plastic, M-06 bathtub type with longitudinally mounted
battery with radio gear positioned on either side of the chassis
Drive: Rear wheel with dogbones
Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE02S brushless compatible
Differential: Gear type
Wheels: Nylon construction, silver colored
Tires: Radial rubber 0.98 (25mm) wide, 2.3 (59mm) diameter, with
foam inserts
Suspension: Fully independent double wishbone
Shocks: Plastic body, friction, not oil filled
Body: Clear polycarbonate, with stickers to recreate the car as it
appeared in the 1971 Monte Carlo rally
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bellcrank type
YOU WILL RECEIVE:
Tamiya '71 Renault Alpine A110 Rally Car, with 540 Brushed Motor,
ESC, Tires, Wheels, ESC, Stickers and Instructions
REQUIREMENTS:
Radio: 2-channel with high speed steering servo
Battery: 7.2V NiMH
Battery Charger: To match selected battery
Building and track equipment
SPECIFICATIONS:
Wheelbase: Adjustable from 8.3 (210mm), 8.8 (225mm), 9.4 (239mm)
Gear Ratio: 5.8:1
Front and Rear Tread: 5.4 (138mm)-distance between center of tires
measured side-to-side
Body;
Length: 15.1 (385mm)
Width: 6 (152mm)
Height: 3.8 (96mm)
COMMENTS
To upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Differential 1 DTXC1547
2 5x11mm Gearbox 1 DTXC1547
2 5x8mm Gearbox 1 DTXC1523
4 5x11mm Rear Hubs 2 DTXC1547
4 5x8mm Steering Linkage 2 DTXC1523
4 5x11mm Front Hubs 2 DTXC1547
jxs 03/05/14
ir/jxs
1971 Renault Alpine A110 On-Road Rally Car Kit.
FEATURES:
Chassis: Plastic, M-06 bathtub type with longitudinally mounted
battery with radio gear positioned on either side of the chassis
Drive: Rear wheel with dogbones
Motor: Tamiya Sport Tuned 540 brushed with aluminum heat sink
Electronic Speed Control: Tamiya TBLE02S brushless compatible
Differential: Gear type
Wheels: Nylon construction, silver colored
Tires: Radial rubber 0.98 (25mm) wide, 2.3 (59mm) diameter, with
foam inserts
Suspension: Fully independent double wishbone
Shocks: Plastic body, friction, not oil filled
Body: Clear polycarbonate, with stickers to recreate the car as it
appeared in the 1971 Monte Carlo rally
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bellcrank type
YOU WILL RECEIVE:
Tamiya '71 Renault Alpine A110 Rally Car, with 540 Brushed Motor,
ESC, Tires, Wheels, ESC, Stickers and Instructions
REQUIREMENTS:
Radio: 2-channel with high speed steering servo
Battery: 7.2V NiMH
Battery Charger: To match selected battery
Building and track equipment
SPECIFICATIONS:
Wheelbase: Adjustable from 8.3 (210mm), 8.8 (225mm), 9.4 (239mm)
Gear Ratio: 5.8:1
Front and Rear Tread: 5.4 (138mm)-distance between center of tires
measured side-to-side
Body;
Length: 15.1 (385mm)
Width: 6 (152mm)
Height: 3.8 (96mm)
COMMENTS
To upgrade to ball bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Differential 1 DTXC1547
2 5x11mm Gearbox 1 DTXC1547
2 5x8mm Gearbox 1 DTXC1523
4 5x11mm Rear Hubs 2 DTXC1547
4 5x8mm Steering Linkage 2 DTXC1523
4 5x11mm Front Hubs 2 DTXC1547
jxs 03/05/14
ir/jxs
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov