Tamiya TAM58583

Product Summary:
User level: Kit, *requires additional parts/components
Mode: Off-Road, *4WD
Scale: 1:10
Type: Buggy, *dirt/clay
Power: LiPo 2S, NiMh /NiCd *6-cell
Radio req'd: 2 channels
Battery: Not included, user defined
Speed Controller: Not included
Motor: Not included - 540 size
Includes charger: No
This is the 1/10 scale, Electric Powered, Radio Controlled
Egress Off-Road Racing Buggy Kit from Tamiya.
Re-issue of the Egress 4WD off-road racing buggy first released in 1989
with modern upgrades compatible with motor and battery technology of today.
Chassis: Carbon fiber plate
Drive: 4 wheel shaft drive with universals
Suspension: Fully independent double wishbone
Differential: Ball pressure plate
Shocks: Oil-filled
Shock Towers: Carbon
Wheels: Black plastic
Tires: Spiked rubber construction
Body: Clear polycarbonate with clear undeRTRay
Steering: Bellcrank type
Ball Bearings: Full set, shielded
Caster: Adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Egress Racing Buggy Kit with Shocks, Tires, Wheels, Body, Decals,
and Instruction Manual
Radio: 2-channel with high-torque steering servo
Motor: 540 suze
ESC: Compatible with selected motor
Battery: 7.2V 6-cell stick pack
Charger: Compatible with selected battery
Building and track equipment
Vehicle;
length: 16.9" (430mm)
width: 9.6" (243mm)
height: 6.2" (157mm)
Body;
length: 12.7" (324mm)
width: 6.4" (164mm)
height: 3.2" (82mm)
For replacement, Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x8mm Rear Diff Gear 1 DTXC1523
2 5x8mm Front Diff Gear 1 DTXC1523
2 8x16mm Rear Diff Gear 1 DTXC1585
2 8x16mm Front Diff Gear 1 DTXC1585
1 5x11mm Torque Splitter 1 DTXC1547
1 5x8mm Drive Gear 1 DTXC1523
4 5x11mm Rear Uprights 1 DTXC1547
4 5x11mm Front Uprights 1 DTXC1547
8 5x8mm Steering Bellcranks 4 DTXC1523