Tamiya TAM58500

$134.40
Tamiya logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
Sand Rover 2011 2WD Off Road Truck Kit
Tamiya TAM58500 - Sand Rover 2011 2WD Off Road Truck Kit

This is the electric powered, radio controlled, 1/10 scale,
Tamiya Sand Rover 2011 Dune Buggy Kit.

FEATURES:
Chassis: DT-02 ABS plastic tub
Drive: Rear wheel
Motor: 380 size (540 size will fit, see COMMENTS)
Pinion Gear: 10 tooth metal
Electronic Speed Control: Tamiya TEU-104BK with reverse
Differential: Planetary gear
Gearbox: Sealed
Shocks: Plastic body, friction type
Transmission: Single-speed
Suspension: Four wheel independent
Body: Molded plastic, white in color
Steering: Two-piece adjustable steering tie rods with servo saver
Tires: Ribbed front 0.83" (21mm) wide, 3.1" (80mm) diameter
Spiked rear 1.5" (39mm) wide, 3.2" (82mm) diameter
Wheels: Nylon resin, white in color
Front, 0.69" (17.5mm) wide, 2.2" (57mm) diameter
Rear, 1.3" (33mm) wide, 2.2" (57mm) diameter, 12mm hex
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable

YOU WILL RECEIVE:
1/10 scale Tamiya Sand Rover Kit with Body, Wheels, Tires, ESC
380 Motor, Servo Saver, Driver Figure, Decals and Instruction
Manual

REQUIREMENTS:
Radio: 2-channel with steering servo
Battery: 6-cell, 7.2V nimh stick pack with standard connector
Battery Charger: To match selected battery
Transmitter Batteries: Four or eight depending on transmitter
Tools and track equipment

SPECIFICATIONS:
Vehicle;
length: 15.3" (390mm)
width: 9.4" (240mm)
height: 6.6" (168mm)
Weight: 2.9lbs (1350g), approximate
Body;
length: 14.3" (364mm)
width: 7.1" (180mm)
height: 2.3" (55mm)

COMMENTS:
When installing a 540 size motor, the following parts are required
and must be purchased separately;
Tamiya #3515005 17 Tooth Pinion Gear (not carried)
3mm Grub Screw (TAMC5076)
Motor Plate (TAMC3120)
To paint body to match photos on box, order the following Tamiya
colors;
TS-12 Orange, TAMR5012 XF-2 Flat White, TAMC8402
X-7 Red, TAMR1507 XF-9 Hull Red, TAMR8409
X-11 chrome Silver, TAMR8111 XF-15 Flat Flesh, TAMR8415
X-18 Semi Gloss Black, TAMR8118
To upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x11mm Gearbox 2 DTXC1547
2 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Rear Axles 1 DTXC1547
4 5x11mm Front Wheels 2 DTXC1547

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov