Tamiya TAM58484

This is the radio controlled, electric powered, 1/10 scale Tamiya TA05 Version II On-Road Race Car with the Weider HSV-010 Body. Chassis: TA05 composite bathtub style 0.08" (2mm) thick, upper deck and 0.10" (2.5mm) lower deck Drive: Two belt, four wheel drive Ball Bearings: Full set included Motor: 540 type Differentials: Ball type, 37 tooth Shocks: Oil-filled CVA Super Mini, plastic bodies Front Bumper: Urethane foam Main Gear: 70 tooth composite Pinion Gear: 20 tooth metal Wheels: 5-spoke gray 0.94" (24mm) wide, 1.9" (47.7mm) +2° offset Tires: Racing slicks, 0.94" (24mm) wide, 2.5" (64mm) diameter, yellow foam inserts Body: Clear untrimmed Honda HSV-010 coupe with separately molded rear wing and mirrors in gray plastic Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Suspension: Four wheel double wishbone, inboard front layout with separate suspension mounts for easy maintenance Steering: Four ball bearing assisted, high torque servo saver Tamiya TA05 Ver. II On-Road Car Kit with Pinion Gear, Spur Gear, 540 Motor, Clear Body, Illustrated Instruction Manual, Tires, Wheels, Decals, Shocks and Shock Oil Radio: 2-channel with one servo and electronic speed control Radio Batteries: 8 AA batteries for transmitter 6-Cell Battery: Stick configuration with Tamiya type connector Charger: AC/DC timed or peak for 6-cell battery Paint: Spray or brush-on polycarbonate safe Building and track equipment Vehicle- Length: 14.7" (373mm) Width: 7.4" (188mm) Wheelbase: 10" (257mm) Tread: 6.5" (165mm) Gear Ratio: 1:7.19 Body- Length: 16.6" (421mm) Width: 7.5" (190mm) Height: 4" (102mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 4 10x15mm F & R Ball Diffs 2 DTXC1595 4 5x8mm F & R Ball Diffs 2 DTXC1523 2 4x8mm Center Pulley 1 DTXC1511 2 5x11mm Front Axles 1 DTXC1547 2 5x11mm Rear Axles 1 DTXC1547 2 5x8mm Steering Arms 2 DTXC1523 Tamiya TA03, TA04, TA05, TL01, TB02, TB03 and TT01 bodies will also fit this chassis. jxs 03/31/11 ir/jxs &