Tamiya TAM58477

This is the electric powered, radio controlled, 1/10 scale
Zahhak Off-Road Racing Buggy kit from Tamiya.
Chassis: Monocoque Bathtub type
Drive: Rear wheel
Gearbox: Sealed
Differential: Ball type
Suspension: Four wheel double wishbone independent suspension with
long span arms and the same geometry as the Tamiya TRF201 buggy
Shocks: Oil-filled CVA, with plastic bodies
Wheels: White plastic dish-Front, 0.98" (25mm) wide
Rear, 2.2" (39mm) wide, both, 2.2" (56mm) diameter
Tires: Front, wide grooved rubber with foam inserts 1" (26mm) wide
3.1" (78mm) diameter
Rear, Dual block with foam inserts 1.9" (48mm) wide, 3.3" (84mm)
diameter
Body: Clear polycarbonate
Spur Gear: 79 tooth composite
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Steering: Bell-crank with servo saver
Tamiya Zahhak Off-Road Racing Buggy kit with Tires, Wheels, Foam
Inserts, Clear Body, Decals and Instruction Manual
Radio: 2-channel with standard size steering servo
Electronic Speed Control: Compatible with selected motor
AA Batteries: Eight for transmitter
Motor: Tamiya Super Stock BZ (TAMC1430) recommended, Tamiya 540J
and Sport-Tuned motors cannot be used
Battery: NiCd or NiMh 6-cell stick with standard connector
Battery Charger: Peak type recommended
Pinion Gear: 20-25 tooth, 48 pitch
Vehicle-
length: 15" (382mm)
width: 9.8" (249mm)
height: 5.3" (136mm)
Weight: 2 lbs (910g) without motor, pinion gear, radio equipment or
battery
Body-
length: 10.25" (260mm)
width: 5.75" (146mm)
height: 2.25" (571mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty Bearing Set
2 5x8mm Ball Diff 1 DTXC1523
2 10x15mm Ball Diff 1 DTXC1595
3 5x10mm Idler Gear 2 DTXC1535
1 4x8mm Counter Gear 1 DTXC1511
2 5x10mm Front Hubs 1 DTXC1535
2 5x10mm Rear Hubs 1 DTXC1535
2 3x7mm Steering 1 DTXC1506
jxs 02/17/11
ir/jxs
&