Tamiya TAM58448

This is the 1/10 scale electric powered, radio controlled, Tamiya Corolla Axio apr GT On Road Car Kit. Chassis: TA05 version II with reduced width for better ground clearance during chassis rolls and battery position shifted further forward, composite bathtub style .08" (2mm) thick, single deck frame Drive: Four wheel two belt drive, tension adjustable Motor: 540 motor with pre-attached leads Ball Bearings: Full set included Shocks: Four oil filled CVA super mini, plastic body Gearboxes: Enclosed, front and rear Differentials: Two ball type, 37T Transmission: Single speed Tires: Slick racing tire with foam inserts, 2.5" (64mm) diameter, 0.94" (24mm) wide Wheels: One-piece 6-spoke gray in color, 1.9" (48mm) diameter, 0.94" (24mm) wide, +2° offset Body: Lightweight polycarbonate Corolla Axio apr with decals Bumpers: Foam front bumper Suspension: IFS (Inboard Front Suspension) with horizontally mounted shocks with push rod and rocker arm, front and rear lightweight reversible arms for fine tuning, double wishbone rear suspension Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bell-crank type Servo Saver: Included TA05 ver.II rolling chassis with oil filled shocks, 540 motor, clear body, slick tires, foam inserts, foam bumper, 6-spoke wheels 22 tooth pinion gear, 70 tooth spur gear, rear wing, mirrors, decal sheet and instructions _ Radio: 2-channel with 1 standard servo and Electronic Speed Control Radio Batteries: 8 AA size Battery: 6-cell stick pack with standard connector Charger: AC/DC peak type for 6-cell battery Paint: Spray or brush-on for Lexan body Misc. Items: Building and track equipment VEHICLE- Length: 14.7" (373mm) Width: 7.4" (188mm) Height: 4.8" (122mm) Weight: 2.3lbs (1060g) Wheelbase: 10.1" (257mm) Tread: 6.5" (167mm) Gear Ratio: 1:7.19 BODY- Length: 16.7" (424mm) Width: 7.6" (194mm) Height: 3.5" (90mm) For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 5x8mm Front Ball Diff 1 DTXC1523 2 5x8mm Rear Ball Diff 1 DTXC1523 2 10x15mm Front Ball Diff 1 DTXC1595 2 10x15mm Rear Ball Diff 1 DTXC1595 2 4x8mm flanged Motor Mount 1 DTXC1517 4 5x10mm Front Hubs 2 DTXC1535 4 5x10mm Rear Hubs 2 DTXC1535 2 4x8mm Center Pulley 1 DTXC1511 4 5x8mm Steering Arms 2 DTXC1523 4 5x8mm Front Shock Stays 2 DTXC1523 jxs 01/05/10 ir/jxs &