Tamiya TAM58447

This is the 1/10 scale, electric powered, radio controlled
Ferrari F60 F104 On-Road Racing Car kit.
Chassis: F104 0.12" (3.2mm) thick composite fiber glass lower deck, 0.08" (2mm) lower
deck
Drive: Two wheel direct with stainless steel rear shaft
Motor: 540 type
Differential: Ball type with resin housing
Ball Bearings: Full set
Body: Clear, untrimmed with 3-dimensional front and rear wings, rear
diffuser, side mirrors and aerofoil suspension arms, can be
assembled with or without polycarbonate sloped side pontoons
Steering: Isometric steering rods links with longitudinally mounted
steering servo position
Suspension: Front, kingpin coil with spacers for ground clearance
adjustment, Rear, T-bar with carbon friction plate and friction
shock
Tires: Racing slicks 1.1" (28mm) wide, 2.4" (62mm) diameter
Wheels: Silver, nylon 1.1" (28.9mm), 1.7" (43mm) diameter
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Non-adjustable
Tamiya F104 Pro On-Road Racing Car kit, tires, wheels, motor, 04
module spur gear, decals, body, shock oil, instruction manual,
friction shock and 25 tooth pinion gear
Radio: 2-channel, small ESC and receiver recommended, standard servo
Radio Batteries: Eight AA
Battery: 6-cell stick pack with Tamiya type connector
Battery Charger: Peak type recommended
Building and track equipment
Vehicle-
length: 16.1" (410mm)
width: 7.1" (180mm)
Wheelbase: 10.6" (270mm)
Tread: Front, 5.9" (150mm), Rear, 5.7" (145mm) measurement at center
of wheels, side-to-side
Body-
length: 14.1" (358mm)
width: 4.8" (122mm) at widest point
height: 3.5" (89mm)
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Rear Shaft 1 DTXC1561
2 8x12mm Ball Diff 1 DTXC1581
1 5x11mm Diff Housing 1 DTXC1547
4 5x10mm Front Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535
Use Tamiya #PS F60 Ferrari Red paint to match color on box
jxs 12/02/09
ir/jxs
updt jxs 06/28/11
&