Tamiya TAM58437

This is the 1/10 scale electric powered, radio controlled, Tamiya Mitsubishi Lancer Evo X On-Road Car Kit. Chassis: TT-01 type E with shock tower now molded separately from the gear case covers and new upper deck with transponder mount, new A parts (Uprights) made of polycarbonate plastic material, new D parts (upper deck, motor cover and more) made of fiberglass- reinforced nylon material Drive: Four wheel shaft drive Motor: 540 size with pre-attached leads Electronic Speed Control: Tamiya TEU-101BK, TAMM3194 Lights: Tamiya TLU-01 (TAMC1394) LED light unit with four LED lights, see COMMENTS Shocks: Friction, not oil-filled, composite body Gearbox: Sealed front and rear Differentials: Bevel gear Transmission: Single speed Tires: Treaded radial 1.02" (26mm) wide, 2.48" (63mm) diameter Wheels: 10-spoke plastic 1.02" (26mm) wide, 2.04" (52mm) diameter, gray in color Body: Lightweight polycarbonate, requires trimming and painting injection molded white plastic side mirrors and rear wing Bumpers: Foam front bumper Suspension: Four wheel independent double wishbone Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering Tie Rods: Fixed non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank TA-05 type with servo saver Servo Saver: Included Tamiya Mitsubishi Lancer Evo X, friction shocks, 540 motor, electronic speed control, clear body, tires, foam bumper, wheels 19 tooth pinion gear, 61 tooth spur gear, instructions, LED light unit, window mask and body trim decals Radio: 2-channel with one steering servo Battery: 6 cell stick pack with standard connector Charger: AC/DC Timed or Peak for 6-cell battery Misc: Polycarbonate safe paint, building & track equipment VEHICLE- Length: 17.4" (443mm) Width: 7.4" (187mm) Height: 5.7" (145mm) BODY- Length: 17.4" (443mm) Width: 6.9" (175mm) behind front wheels, narrowest point 7.5" (190mm) at rear wheels, widest point Height: 4.5" (115mm) The TLU-02 Light Control Unit (not included) can be installed for more light effects, order TAMC1477. For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 12 5x11mm front & rear diff gears, hubs 6-DTXC1547 4 8X12mm front & rear diff gears 2-DTXC1597 Body pictured on the box is painted silver. jxs 7/23/09 ir/jxs &