Tamiya TAM58355

$164.80
Tamiya logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
alternate part numbers:
1:10 Audi A4 Dtm W/Finished Body Red Bull
Tamiya TAM58355 - 1:10 Audi A4 Dtm W/Finished Body Red Bull

This is the electric powered, radio controlled 1/10 scale
Tamiya Audi A4 DTM on-road Car Kit.
FEATURES:
Chassis: Plastic tub TT-01 design
Drive: Four wheel shaft drive
Motor: 540 motor with pre-attached leads
Bearings: Bearings used on the differentials, plastic bushings use
elsewhere
Shocks: Friction, plastic body
Gearbox: Enclosed, front and rear
Differentials: Bevel gear, ball bearing equipped
Transmission: Single speed
Body: .03" (.8mm) polycarbonate, painted and trimmed to depict the
Red Bull Audi A4 DTM 2005 No. 1 driven by M Ekstrom
Tires: Racing slicks 2.6" (65mm) outer diameter
1" (25.4mm) wide
Wheels: Silver 16-Spoke 2" (51mm) outer diameter
Speed Control: TEU-101BK Electronic, w/reverse & standard connector
TAMM3194
Bumper: Foam front bumper
Suspension: Double wishbone
Camber Tie Rods: Non-adjustable
Steering Tie Rods: Non-adjustable
Steering: Bell-crank type
Servo Saver: Included
YOU WILL RECEIVE:
Tamiya Audi A4 DTM on-road car, 540 motor, ESC, painted and decaled
body, tires, foam bumper, spoke wheels, 19 tooth 49 pitch metric
pinion gear, 61 tooth spur gear and building instructions
REQUIREMENTS:
Radio Batteries: 8 AA size (for transmitter)
Battery: 6 flat pack with standard connector
Radio: 2 channel with one servo
Charger: AC/DC Timed or Peak for 6-cell battery
Misc. Items: Building and track equipment
SPECIFICATIONS:
VEHICLE-
length: 15.3" (389mm)
width: 7.25" (184mm)
height: 5.75" (146mm)
Weight: 2.2lbs (990g) kit only
3.3lbs (1490g) with battery, speed control, motor and
radio equipment (approximate)
Wheelbase: 10.1" (257mm)
Tread: Front- 6.3" (160mm)
Rear- 6.4" (162mm) side-to-side at wheel centers
Gear Ratio: 8.35:1
Tires, F & R: Overall Diameter 2.6" (65mm)
Overall Width 1" (25.4mm)
Inner Bead Diameter 2" (51mm)
BODY-
length: 17" (431mm)
width: 7.5" (190mm)
height: 4.5" (114mm)
COMMENTS:
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
12 5 x11mm front & rear diff gears, hubs (use 6-DTXC1547)
4 8 X12mm front & rear diff gears (use 2-DTXC1597)
Body is painted Blue and Gray with all body trim and sponsor decals
applied.
jxs 11/01/05
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov