Tamiya TAM58328

$123.11
Tamiya logo
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.
1:10 Gravel Hound 4wd Buggy Kit
Tamiya TAM58328 - 1:10 Gravel Hound 4wd Buggy Kit
This is the 1/10 scale electric powered, radio controlled, 4 wheel drive Tamiya Gravel Hound Off-Road Buggy kit. _
FEATURES:
Chassis: ABS plastic DF-02 bathtub style Drive: Four wheel shaft drive Motor: 540 size Electronic Speed Control: Tamiya TEU-101BK with reverse, TAMM3194 Shocks: Four oil-filled plastic bodied with 5mm ball connectors Gearboxes: Front and rear sealed Differentials: Planetary metal gears Transmission: Single-speed Body: Polycarbonate buggy, clear and untrimmed Tires: Spike, 3.4" (86mm) outer diameter, 2.2" (56mm) inner diameter Rear Width, 1.5" (38mm), Front Width, 1.2" (30mm) Wheels: One piece, white in color 2.1" (54mm) diameter Rear Width, 1.1" (29mm), Front Width, 0.94" (24mm) Bumpers: Plastic, front and rear Suspension: Front and rear double wishbone four wheel independent Camber: Non adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable steering tie rods, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver
YOU WILL RECEIVE:
Tamiya 1/10 scale Gravel Hound Buggy with oil-filled shocks, 540 motor, clear buggy body, tires, wheels, 19 tooth pinion gear, decal sheet, ESC, 70 tooth spur gear and instructions _
REQUIREMENTS:
Radio: 2-Channel with 1 standard size steering servo Radio Batteries: (8) AA size Battery: 6-cell stick with Tamiya type connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment
SPECIFICATIONS:
Length: 15.7" (400mm) Width: 9.8" (249mm) Height: 6.7" (170mm) Weight: 2.6 lbs (1195g) approx. BODY- Length: 11.75" (298mm) Width: 5.7" (146mm) ahead of rear wheels (widest point) 2" (51mm) at front wheels (thinnest point) Height: 3.5" (89mm)
COMMENTS:
For Replacement Ball Bearings use: Qty. Size Location Qty. Bearing Set 2 5x11mm Rear Diff 1 DTXC1547 1 8x12mm Front Diff 1 DTXC1581 2 8x12mm Rear Diff 1 DTXC1581 2 5x11mm Drive Shaft 1 DTXC1547 2 5x11mm Front Axles 1 DTXC1547 2 5x11mm Rear Axles 1 DTXC1547 To paint body to match photo on box use Tamiya PS-35 Blue Violet (TAMR8635). jxs 7/29/05 ir/jxs &
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov