Tamiya TAM58312
$120.83
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1:10 Blackfoot Xtreme Kit
This is the 1/10 scale electric powered, radio controlled, 2 wheel drive
Tamiya Blackfoot Xtreme off-road Monster Truck Kit.
_
Chassis: Polycarbonate monocoque
Drive: Rear wheel drive
Motor: Stock type, pre-installed on gearbox with leads attached
Bushings: Fully equipped throughout kit except for two ball bearings
on the differential gear, can be fully equipped with bearings see
COMMENTS
Shocks: Friction, (not oil-filled) plastic bodied with coil-over
springs
Gearbox: Closed rear, preassembled
Differential: Planetary gear
Transmission: Single-speed
Tires: Spiked 5.1" (130mm) outer diameter, 2.1" (53mm) wide,
2.12" (54mm) inner diameter
Wheels: Yellow, six swept spoke 2.1" (54mm) diameter, 1.9" (48.5mm)
width
Speed Control: Electronic, Tamiya TEU-101BK (TAMM3194)
Body: Molded Black plastic pickup truck style with Brown tinted
windows, chrome finish plastic roll bar, grille, front and rear
bumpers
Decals: Peel and stick body and light accents and sponsor decals
Bumpers: Front, Black plastic
Suspension: Fixed non-adjustable
Camber Tie Rods: Fixed non-adjustable vertically
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Steering: Bell-crank type
Servo Saver: Included
Tamiya Blackfoot Xtreme with friction shocks, motor, Electronic Speed
Control, molded Black body, tires, wheels, 18 tooth pinion gear,
decals, roll bar, instructions
_
Radio: 2-channel with One standard size servo
Radio Batteries: (8) AA size
Battery: 6-cell flat pack w/ standard connector (7-cell will not fit)
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment
VEHICLE-
Length: 17.5" (445mm)
Width: 12.2" (310mm)
Height: 10.5" (267mm)
Weight: 4 lbs (1840g) approx.
Tires-Front, Rear: 5.1" x 2.1" x 2.12" (130mm x 53mm x 54mm)
BODY-
Length: 15.6" (397mm)
Width: 6.75" (171mm) at rear wheels (widest point)
6.25" (158mm) behind from wheels (thinnest point)
Height: 4.5" (114mm)
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
(4) 5 x 11mm rear axles (use 2-DTXC1547)
(4) 5 x 11mm front axles (use 2-DTXC1547)
(6) 5 x 11mm diff gearbox (use 3-DTXC1547)
Body pictured on the box is molded in Black with Neon Pink body
accents and all body trim decals applied
jxs 12/30/03
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov