Tamiya TAM58305

This is the 1/10 scale electric powered, radio controlled, four wheel drive, Tamiya Subaru Impreza, on-road, car kit. _

FEATURES:

Chassis: Plastic tub TT-01 design Drive: Four wheel shaft drive Motor: 540 motor with pre-attached leads Plastic and metal bushings Shocks: Friction, plastic body Gearbox: Open, front and rear Differentials: Planetary gear Transmission: Single speed Tires: 2.6" (65mm) outer diameter, racing radial type Wheels: Ten-spoke, 2" (51mm) outer diameter, Gold Speed Control: Mechanical 3 step, standard connectors Bumpers: Foam front bumper Suspension: Fixed non-adjustable Camber Tie Rods: Fixed non-adjustable, 3 part (Camber is how the tires sit vertically) Steering Tie Rods: fixed non-adjustable (Caster/Toe-in is how the tires point inward as viewed from above) Steering: Bell-crank type Servo Saver: Included

INCLUDES:

Enzo Ferrari rolling chassis with friction type shocks, 540 motor, mechanical speed control, clear body, tires, foam bumper, Ten spoke wheels, 19 tooth pinion gear, 61 tooth spur gear, decal sheet and instructions. _

REQUIRES:

Radio: 2-channel with 2 standard servos Radio Batteries: 8 AA size Battery: 6 flat pack with standard connector Charger: AC/DC timed or peak for 6-cell battery Paint: Paint for a lexan body Misc. Items: building and track equipment

SPECS:

VEHICLE- Length: 18" (457mm) Width: 7.9" (202mm) Height: 4.3" (110mm) Weight: 2.2lbs (990g) kit only 3.3lbs (1490g) with battery, speed control, motor and radio equipment Wheelbase: 10.1" (257mm) Tread: Front- 6.3" (159mm) Rear- 6.2" (157mm) side-to-side at wheel centers Ground Clearance: 0.35" (9mm) Gear Ratio: 8.35:1 Tires- Width: 1" (26mm) Wheels- Width: 1" (26mm) Inner Diameter: 1.8" (46mm) Diameter: 1.9" (47.5mm) Outer Diameter: 2.6" (65mm) BODY- Length: 18-2/8" (460mm) Width: 7-1/2" (190mm) at rear wheels (widest point) Height: 4-1/4" (110mm)

COMMENTS:

For Replacement Ball Bearings use: Qty. Size Location Bearing Set Qty. 12 5 x11mm front & rear diff gears, hubs (use 6-DTXC1547) 4 8 X12mm front & rear diff gears (use 2-DTXC1597) JiM 09.08.03 ir/jxs

this information was sourced from Great Planes Model Distributors