Tamiya TAM58302
$99.59

in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1:10 Enzo Ferrari Tt-01 Kit
This is the 1/10 scale electric powered, radio controlled, four wheel drive,
Tamiya Enzo Ferrari, on-road, car kit.
_
Chassis: Plastic tub TT-01 design
Drive: Four wheel shaft drive
Motor: 540 motor with pre-attached leads
Plastic and metal bushings
Shocks: Friction, plastic body
Gearbox: Open, front and rear
Differentials: Bevel gear
Transmission: Single speed
Tires: 2.6" (65mm) outer diameter, racing radial type
Wheels: Five spoke, 2" (51mm) outer diameter, Silver
Speed Control: Mechanical, standard connectors
Bumpers: Foam front bumper
Suspension: Fixed non-adjustable
Camber Tie Rods: Fixed non-adjustable, 3 part
Steering Tie Rods: fixed non-adjustable
Steering: bell-crank type
Servo Saver: included
Enzo Ferrari rolling chassis with friction type shocks, 540 motor,
mechanical speed control, clear body, tires, foam bumper,
spoke wheels, 19 tooth pinion gear, 61 tooth spur gear, decal sheet
and instructions.
_
Radio: 2-channel with 2 standard servos
Radio Batteries: 8 AA size
Battery: 6 flat pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Paint: Paint for a Lexan body
Misc. Items: building and track equipment
VEHICLE-
Length: 18" (457mm)
Width: 7.9" (202mm)
Height: 4.3" (110mm)
Weight: 2.2lbs (990g) kit only
3.3lbs (1490g) with battery, speed control, motor and
radio equipment
Wheelbase: 10.1" (257mm)
Tread: Front- 6.3" (159mm)
Rear- 6.2" (157mm) side-to-side at wheel centers
Ground Clearance: .35" (9mm)
Gear Ratio: 8.35:1
Tires- Width: 1" (26mm) Wheels- Width: 1" (25.4mm)
Inner Diameter: 1.8" (46mm) Diameter: 1.9" (47.5mm)
Outer Diameter: 2.6" (65mm)
BODY-
Length: 18¼" (470mm)
Width: 7½" (190mm) at rear wheels (widest point)
Height: 4¼" (110mm)
For Replacement Ball Bearings use:
Qty. Size Location Bearing Set Qty.
12 5 x11mm front & rear diff gears, hubs (use 6-DTXC1547)
4 8 X12mm front & rear diff gears (use 2-DTXC1597)
Body pictured on the box is painted with the following Tamiya colors,
Polycarbonate paint, PS-2 Red
PS-31 Smoke
PC-5 Black
Plastic Paint TS-8 Red (TAMR5008)
ajw 5-05-03
ir/jxs
&
FEATURES:
YOU WILL RECEIVE:
REQUIREMENTS:
SPECIFICATIONS:
COMMENTS: