Tamiya TAM57890
$299.60
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.1/24 XB Heavy Dump Truck 4WD RTR GF-01
This is the Tamiya 1/24 scale Electric Powered, Radio Controlled,
Ready to Run Heavy Duty Dump Truck.
From Tamiya's XB Pro Expert Built Series.
Drive: Four wheel with dogbones
Motor: 540 brushed
Radio: Finespec 2.4GHz
Electronic Speed Control: Tamiya TEU105BK
Differentials: Front and rear in sealed gearbox integrated into frame
Body: Injection molded resin, yellow in color with separate cab and
rear dump bed, dump bed can be changed between flat and raised
positions by changing position of stays and snap pins in body
mounts, bed does not raise or lower
Suspension: Fully independent double wishbone
Shocks: Plastic body friction
Steering: Bellcrank type
Tires: V-pattern and spike rubber with foam inserts
Wheels: Yellow plastic deep rim design 2.7" (68.3mm) wide, 4.7"
(119mm) diameter
Bumper: Front spring loaded
Camber Tie Rods: Fixed non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Tires, Wheels, Shocks, 2.4GHz Radio and
Instruction Manual
Battery Charger: Compatible with selected battery
AA Batteries: Four for transmitter
length: 13.8" (350mm)
width: 10.6" (270mm)
height: 8.3" (210mm)
Body;
length: 12.5" (317mm)
width: 6.5" (165mm)
height: 4.4" (112mm)
Qty. Size Location Qty Bearing Set
2 5x11mm Differential 1 DTXC1547
8 5x11mm Counter Gears 4 DTXC1547
4 5x11mm Front Uprights 2 DTXC1547
4 5x11mm Rear Uprights 2 DTXC1547
2 5x8mm Steering Linkage 1 DTXC1523
jxs 04/28/16
ir/jxs
&
Ready to Run Heavy Duty Dump Truck.
From Tamiya's XB Pro Expert Built Series.
FEATURES:
Chassis: GF-01 plastic monocoque type with rear wheelie bar Drive: Four wheel with dogbones
Motor: 540 brushed
Radio: Finespec 2.4GHz
Electronic Speed Control: Tamiya TEU105BK
Differentials: Front and rear in sealed gearbox integrated into frame
Body: Injection molded resin, yellow in color with separate cab and
rear dump bed, dump bed can be changed between flat and raised
positions by changing position of stays and snap pins in body
mounts, bed does not raise or lower
Suspension: Fully independent double wishbone
Shocks: Plastic body friction
Steering: Bellcrank type
Tires: V-pattern and spike rubber with foam inserts
Wheels: Yellow plastic deep rim design 2.7" (68.3mm) wide, 4.7"
(119mm) diameter
Bumper: Front spring loaded
Camber Tie Rods: Fixed non-adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
YOU WILL RECEIVE:
RTR Heavy Duty Dump Truck with ESC, Motor, Molded Resin Body Tires, Wheels, Shocks, 2.4GHz Radio and
Instruction Manual
REQUIREMENTS:
Battery: 7.2V NiMh 6-cell stick pack with standard connector Battery Charger: Compatible with selected battery
AA Batteries: Four for transmitter
SPECIFICATIONS:
Vehicle; length: 13.8" (350mm)
width: 10.6" (270mm)
height: 8.3" (210mm)
Body;
length: 12.5" (317mm)
width: 6.5" (165mm)
height: 4.4" (112mm)
COMMENTS:
To upgrade to ball bearings order; Qty. Size Location Qty Bearing Set
2 5x11mm Differential 1 DTXC1547
8 5x11mm Counter Gears 4 DTXC1547
4 5x11mm Front Uprights 2 DTXC1547
4 5x11mm Rear Uprights 2 DTXC1547
2 5x8mm Steering Linkage 1 DTXC1523
jxs 04/28/16
ir/jxs
&
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov