Tamiya TAM57802

This is the radio controlled, electric powered, ready to run Alpha Romeo MiTo On-Road Car from Tamiya. Chassis: M-05 resin monocoque design, composite construction Drive: Front wheel Shocks: Plastic body friction type Shock Towers: Composite construction Motor: 540 size Radio: Tamiya 2-channel Finespec FM Electronic Speed Control: Tamiya TEU-104BK with reverse, TAMM4541 Gearbox: Sealed, integral with chassis Transmission: Single speed, ball bearing equipped Differential: Three bevel gear Suspension: Four wheel independent double wishbone Body: Painted and trimmed polycarbonte with side mirrors and rear wing Tires: Treaded 60D radial 0.98" (25mm) wide, 2.3" (59mm) diameter with foam inserts Wheels: Silver colored 0.94" (24mm) wide, 1.5" (38mm) diameter Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Three piece tie-rod linkage for sharp cornering RTR Alpha Romeo MiTo M-05, tires, wheels, foam inserts, 20 tooth pinion gear, shocks, ESC, motor, instruction manual and FM radio AA Batteries: 8 for transmitter Battery: 6-cell stick with standard connector Battery Charger: Peak type recommended Building and track equipment Vehicle; Length: 15.1" (383mm) Width: 5.7" (145mm) Height: 5.6" (142mm Wheelbase: 9.4" (239mm) Tread: 5.4" (138mm) center of wheels, side-to-side Body; Length: 14.8" (377mm) Width: 6.2" (158mm) Height: 4.2" (108mm) For Replacement or to Upgrade To Ball Bearings use: Qty. Size Location Qty. Bearing Set 1 5x8mm Counter Gear 1 DTXC1523 1 5x11mm Counter Gear 1 DTXC1547 1 5x8mm Spur Gear 1 DTXC1523 1 5x11mm Spur Gear 1 DTXC1547 2 5x11mm Output Shaft 1 DTXC1547 2 5x11mm Front Axles 1 DTXC1547 2 5x10mm Rear Axles 1 DTXC1535 jxs 08/19/10 ir/jxs &