Tamiya TAM57711

This is the 1/10 scale electric powered, radio controlled,
almost ready to run Tamiya XB Neo-Top Force DF01 RTR off-road Racing Buggy.
This kit is part of Tamiya's XB (Expert Built) series.

Chassis: Plastic tub
Drive: Four wheel shaft drive
Motor 540 size
Radio: Tamiya Expec SP AM pistol grip with steering and throttle
trims, servo reverse and standard steering servo
Shocks: Four friction (not oil-filled) plastic bodied
Gearboxes: Sealed front and rear
Differentials: Planetary gear
Transmission: Single-speed
Body: Trimmed and painted buggy style with rear wing and all decals
applied
Tires: Spike treaded, Front, 3.25" (82mm) diameter, 1" (25mm) wide
Rear, 3.25" (82mm) diameter, 1.5" (38mm) wide
Wheels: 5-spoke white, Front, 2.25" (57mm) diameter, 1" (25mm) wide
Rear, 2.25" (57mm) diameter, 1.5" (38mm) wide
Speed Control: Electronic, with Kyosho type connector
Bumpers: Front and rear black plastic
Suspension: Double wishbone
Camber Tie Rods: Fixed non-adjustable
Steering Tie Rods: Fixed non-adjustable
Steering: Bell-crank type (if this applies)
Servo Saver: Included

One Tamiya XB Neo-Top Force DF01 RTR off-road Racing Buggy with electronic speed
control, painted body, tires, wheels, 2-ch pistol grip radio with
standard servo, instructions _

Radio Batteries: Eight AA size
Battery: 6-cell flat with standard connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Building and track equipment

VEHICLE-
length: 15.5" (395mm)
width: 9.9" (251mm)
height: 5.75" (146mm)
Weight: 2.9 lbs (1320g) without battery
Wheelbase: 10.5" (267mm)
Front Tread: 8.6" (219mm) side to side at wheel centers
Rear Tread: 8.25" (209mm)
Front Track: 9.5" (241mm)
Rear Track: 9.6" (245mm)
Ground Clearance: 1" (25mm)
Tires- Front: 2.25" x 1" (57mm x 25mm)
Rear: 3.25" x 1" (82mm x 25mm)
BODY-
length: 9.9" (251mm)
width: 6.4" (162mm) at widest point
2.5" (63mm) behind from wheels (thinnest point)
height: 2.7" (70mm)