Tamiya TAM47374
$206.50
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Ferrari 312T3 F104W On Road 2WD
The Ferrari 312T3 returns! Not seen since 1991, this special limited-edition release has been re-imagined on the Tamiya F104W F-1 chassis.
The 312T3 made its debut in the 1978 South African Grand Prix. Underneath its aerodynamically polished body with a 3-liter 12-cylinder 510hp engine. Drivers C. Reutemann and G. Villeneuve took the 312T3 to 4 victories for the season and the runner-up spot in the 1978 Constructors Championship.
- Polycarbonate & ABS body parts. It features a bumper to go under the front wing, and a helmeted driver figure
- Wings and wheels are metal plated.
- Bonus body! A separate standard polycarbonate body is also included in the kit
- The F104W chassis has F103 front suspension arms to replicate the wide form of the 312T3. It utilizes an FRP semi-double deck (upper: 2mm, lower: 3.2mm) and longitudinal battery position
- Highly efficient direct drive 2WD features the motor pinion directly connected to the spur gear which has a built-in ball differential.
- Gear case allows 5 different ground clearances
- Kingpin coil spring front and T-bar rear suspension setups provide smooth and precise driving characteristics
- 2 car markings: (Nos. 11 and 12 included)
- Type 540 motor included
- Radio system (transmitter and receiver)
- Steering servo
- 7.2-7.4 volt battery pack & compatible charger
- Electronic Speed Control (ESC)
- Tamiya PS paint
- Width: 201mm
- Adjustable Gear Ratio: Yes
- Bearings: Yes
- Body Material: Polycarbonate & ABS Plastic
- Body Stickers: Vinyl
- Chassis Material: FRP
- Chassis Type: F103W
- Construction Type: Assembly Kit
- Differential Type: Ball Differential
- Drive Type: 2WD
- Motor: 540 Brushed type
- Scale: 1/10
- Shock Damper: Mono Shock
- Suspension: Mono Shock Rear/Independent coil spring front
- Terrain Use: On-Road
description revised by: SN September 30, 2019
The 312T3 made its debut in the 1978 South African Grand Prix. Underneath its aerodynamically polished body with a 3-liter 12-cylinder 510hp engine. Drivers C. Reutemann and G. Villeneuve took the 312T3 to 4 victories for the season and the runner-up spot in the 1978 Constructors Championship.
FEATURES:
- 1/10 scale R/C model assembly kit- Polycarbonate & ABS body parts. It features a bumper to go under the front wing, and a helmeted driver figure
- Wings and wheels are metal plated.
- Bonus body! A separate standard polycarbonate body is also included in the kit
- The F104W chassis has F103 front suspension arms to replicate the wide form of the 312T3. It utilizes an FRP semi-double deck (upper: 2mm, lower: 3.2mm) and longitudinal battery position
- Highly efficient direct drive 2WD features the motor pinion directly connected to the spur gear which has a built-in ball differential.
- Gear case allows 5 different ground clearances
- Kingpin coil spring front and T-bar rear suspension setups provide smooth and precise driving characteristics
- 2 car markings: (Nos. 11 and 12 included)
- Type 540 motor included
YOU WILL RECEIVE:
- One (1) car kit, as describedREQUIREMENTS:
- Assembly- Radio system (transmitter and receiver)
- Steering servo
- 7.2-7.4 volt battery pack & compatible charger
- Electronic Speed Control (ESC)
- Tamiya PS paint
SPECIFICATIONS:
- Length: 447mm- Width: 201mm
- Adjustable Gear Ratio: Yes
- Bearings: Yes
- Body Material: Polycarbonate & ABS Plastic
- Body Stickers: Vinyl
- Chassis Material: FRP
- Chassis Type: F103W
- Construction Type: Assembly Kit
- Differential Type: Ball Differential
- Drive Type: 2WD
- Motor: 540 Brushed type
- Scale: 1/10
- Shock Damper: Mono Shock
- Suspension: Mono Shock Rear/Independent coil spring front
- Terrain Use: On-Road
description revised by: SN September 30, 2019
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov