Tamiya TAM47366
$149.60
in stock? NO
This item is on back-order. It's difficult to know when it will be available to ship.Plasma Edge II Black Metallic TT-02B
**Additional Technical Info Will Be Added When It Becomes Available. **
This is the Radio Controlled, Electric Powered, 1/10 scale,
TT-02B Plasma Edge II Buggy Kit with Black Metallic Plate Body.
Chassis: Plastic, TT-02B-uses TT-02 bathtub type plastic chassis
as a base and adds longer suspension arms, CVA shocks, and buggy
bumpers
Drive: Four wheel shaft drive with plastic dogbones
Motor: 540 RS brushed, Torque Tuned
ESC: TBLE-02 brushless compatible
Differential: Four pinion resin gear type
Suspension: Fully independent double wishbone
Shocks: Oil filled plastic body, CVA
Tires: Rubber pin spike 3.2" (82mm) outer diameter
Wheels: 5-spoke plastic 2.04" (52mm) diameter, front width
1.1" (29mm), rear width 1.4" (35mm) with black chrome finish
Steering: Bellcrank type
Bumper: Front plastic
Body: Factory trimmed, metallic black plated body and wing
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, front only caster/toe-in refers to the angle of
the front suspension when viewed from the side of the car in
relation to the chassis
TT-02B Buggy Chassis with Brushed Motor, ESC, Metallaic Plated Body,
Tires, Wheels, Decals, and Instruction Manual
Radio: 2-channel with steering servo
Battery: 7.2V stick pack with standard connector
Battery Charger: For selected battery pack
Polycarbonate safe spray or brush-on paint
Track and maintenance equipment
Vehicle;
length: 15" (380mm)
Wheelbase: 10.5" (266mm)
Body;
length: 11.25" (286mm)
width: 5.7" (144mm)
height: 3" (76mm)
For replacement, Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Drive Shaft 1 DTXC1547
2 5x11mm Fr Uprights 1 DTXC1547
2 5x11mm Rear Uprights 1 DTXC1547
jxs 02/16/18
ACCESSORIES
This is the Radio Controlled, Electric Powered, 1/10 scale,
TT-02B Plasma Edge II Buggy Kit with Black Metallic Plate Body.
FEATURES:
Chassis: Plastic, TT-02B-uses TT-02 bathtub type plastic chassis
as a base and adds longer suspension arms, CVA shocks, and buggy
bumpers
Drive: Four wheel shaft drive with plastic dogbones
Motor: 540 RS brushed, Torque Tuned
ESC: TBLE-02 brushless compatible
Differential: Four pinion resin gear type
Suspension: Fully independent double wishbone
Shocks: Oil filled plastic body, CVA
Tires: Rubber pin spike 3.2" (82mm) outer diameter
Wheels: 5-spoke plastic 2.04" (52mm) diameter, front width
1.1" (29mm), rear width 1.4" (35mm) with black chrome finish
Steering: Bellcrank type
Bumper: Front plastic
Body: Factory trimmed, metallic black plated body and wing
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, front only caster/toe-in refers to the angle of
the front suspension when viewed from the side of the car in
relation to the chassis
YOU WILL RECEIVE:
TT-02B Buggy Chassis with Brushed Motor, ESC, Metallaic Plated Body,
Tires, Wheels, Decals, and Instruction Manual
REQUIREMENTS:
Radio: 2-channel with steering servo
Battery: 7.2V stick pack with standard connector
Battery Charger: For selected battery pack
Polycarbonate safe spray or brush-on paint
Track and maintenance equipment
SPECIFICATIONS:
Vehicle;
length: 15" (380mm)
Wheelbase: 10.5" (266mm)
Body;
length: 11.25" (286mm)
width: 5.7" (144mm)
height: 3" (76mm)
COMMENTS:
For replacement, Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Spur Gear 1 DTXC1547
2 5x11mm Drive Shaft 1 DTXC1547
2 5x11mm Fr Uprights 1 DTXC1547
2 5x11mm Rear Uprights 1 DTXC1547
jxs 02/16/18
ACCESSORIES
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov